CP-7-series Verification System Instruction manual(2.0E).pdf - 第104页

12. Next Production V erification Edition 2.0 93 CP-7-series V erification System Instruction Manual 12. Next Production V erification 12.1 Overview The "next production verification" function checks the of fli…

100%1 / 131
11. Using the FULL AUTO Mode
Edition 2.0 92 CP-7-series Verification System Instruction Manual
11.7.2 When Using the Scanner
When in the FULLAUTO mode, it is possible to change to the DC AUTO mode and
begin a verification operation simply by scanning the “1” barcode with the [Main Menu]
displayed in the Handy Scanner dialog box.
Once a change to the DC AUTO mode has occurred, it is only possible to return to the
FULLAUTO mode after verification has been completed or aborted.
Handy Scanner’s Main Menu
12. Next Production Verification
Edition 2.0 93 CP-7-series Verification System Instruction Manual
12. Next Production Verification
12.1 Overview
The "next production verification" function checks the offline device table which is to be used
next. This function is performed with the device table mode set to the "changeover" mode.
The "next production verification" operation begins by selecting the recipe scheduled for use in
the next production, and then, based on that recipe information, a Verification operation is
performed for the offline device table which is to be used.
At the next changeover, when switching to a recipe where a “next production verification” was
performed, automatic operation can be executed without performing a device check, thereby
reducing the changeover time.
However, these procedures can only be performed at the Handy Terminal.
12.2 Selecting the Next Production Recipe
12.2.1 Operation Conditions
• Part verification system settings must be specified as "With Handy Terminal".
• Communication with Handy Terminal must be established.
• The device table mode must be set to the "changeover" mode.
• The table mode for the next production recipe which is selected must be set to the
"changeover" mode.
12.2.2 Procedure
1. At the PDT-3100’s [Main Menu], select [SET VERIFY RECIPE].
At the Handy Scanner’s [Main Menu], select [SET NEXT RECIPE].
PDT-3100’s Main Menu
12. Next Production Verification
Edition 2.0 94 CP-7-series Verification System Instruction Manual
Handy Scanner’s Main Menu
2. A list of recipes currently stored in the machine then displays. Use the [▲], [▼] keys
to move the cursor to the desired item, then press [ENTER].
PDT-3100’s Next Production Recipe Selection Screen
Handy Scanner’s Next Production Recipe Selection Screen