CP-7-series Verification System Instruction manual(2.0E).pdf - 第58页
9. Using The Normal V erification Mode Edition 2.0 47 CP-7-series V erification System Instruction Manual 9.3 Normal V erification Procedure 4 Device check start Stage to be checked is determined Device check completed S…
9. Using The Normal Verification Mode
Edition 2.0 46 CP-7-series Verification System Instruction Manual
9.2.6 Setting the Feeder
• Set a feeder in the slot which is to be verified.
Data flow
The device comment read to the Handy Terminal is checked against recipe data.
It is the operator’s responsibility to select the slot where the verified feeder is to be set.
CC
CC
PP
PP
77
77
1 1 aaaaa
1 2 bbbbb
2 1 ccccc
2 2 ddddd
Stage Slot Comment
Stage Slot Comment
CP7V0016E
Production Program
Specifications:
Acquired Data:
(3) Comparison
Stage
Slot
Comment
Production Program
(1) Production Program Analysis
(2) Device Comment Reading
9. Using The Normal Verification Mode
Edition 2.0 47 CP-7-series Verification System Instruction Manual
9.3 Normal Verification Procedure 4
Device check start
Stage to be checked is determined
Device check completed
Slot to be checked is determined
Mismatch
No
No
To [1]
To [2]
CP7V0010E
Match
Device comment reading
All device checks completed
at this stage?
ID which was read is
compared with recipe’s
device comment
Device checks completed
at both sides?
: Operator tasks
: Machine processing
LED on at slot to be verified
Feeder is set
LED on at stage to be verified
Unshaded box
Shaded box
[1]
[2]
Yes
Yes
9. Using The Normal Verification Mode
Edition 2.0 48 CP-7-series Verification System Instruction Manual
9.3.1 Device Check Start
• A device check can be started in the following three ways.
I. By selecting [Device Check] at the machine control panel.
II. At the PDT-3100’s [Main Menu], select [1. Verify Check], then press [Enter].
PDT-3100’s Main Menu
III. With the main menu displayed at the Handy Scanner dialog box, read the "1"
barcode, and select "1. VERIFY CHECK".
Handy Scanner’s Main Menu
ENTER
[MAIN MENU]
1. VERIFY CHECK
2. PRE VERIFY CHECK
3. SET VERIFY RECIPE
4. PALLET SUPPLY
5. TEST READ
SELECT NO.=v
▼▲
CP7V0005