CP-7-series Verification System Instruction manual(2.0E).pdf - 第114页
13. Offline Changeovers Edition 2.0 103 CP-7-series V erification System Instruction Manual Handy Scanner ’s Unit V erification Complete Screen Handy Scanner ’s Unit V erification Error Scren 8. At the [Pallet Change] sc…
13. Offline Changeovers
Edition 2.0 102 CP-7-series Verification System Instruction Manual
6. Use Handy Terminal to read barcode which indicates the stage number, and then specify
the stage where the pallet is to be mounted.
PDT-3100’s Unit Supply Stage Selection Screen
Handy Scanner’s Unit Supply Stage Selection Screen
7. The machine checks with Fujitrax Verifier to see if the pallet has been verified
(Verification operation), and the check result displays at Handy Terminal.
PDT-3100’s Unit Verification Complete Screen PDT-3100’s Unit Verification Error Screen
NEXT: /QUIT:
[PALETTE SUPPLY]
Recipe: Recipe1
UNIT ID: Table1
STAGE NO.:STAGE1
Verifier ANS.:OK
CP7V0029a
▼
▼
RESET: /QUIT:
[PALETTE SUPPLY]
Recipe: Recipe1
UNIT ID: Table1
STAGE NO.:STAGE1
Verifier ANS.:NG
▼
▼
ENTER/QUIT:
[PALETTE SUPPLY]
Recipe: Recipe1
UNIT ID: Table1
READ STAGE NO. LABEL
STAGE NO.=v
CP7V0028a
▼
13. Offline Changeovers
Edition 2.0 103 CP-7-series Verification System Instruction Manual
Handy Scanner’s Unit Verification Complete Screen
Handy Scanner’s Unit Verification Error Scren
8. At the [Pallet Change] screen, replace (rewrite) the pallets which have been used up to
this point with the new pallets which have been verified.
13.4 Changeovers in FULL AUTO Mode
The procedure for changeovers in the FULLAUTO mode is identical to that in the normal
verification mode.
14. Registering Data at Fujitrax Verifier
Edition 2.0 104 CP-7-series Verification System Instruction Manual
14. Registering Data at Fujitrax Verifier
14.1 Overview
When the scanner is used, part data and feeder data can be registered at Fujitrax Verifier on
the machine.
Although the ID information (combination information) is registered at Fujitrax Verifier by the
normal verification mode operation, the scanner can be used to perform this registration
without having to perform the normal verification mode operation.
Note: When using the PDT-3100, part data and feeder data cannot be registered at Fujitrax Verifier on
the machine.
14.2 Data Registration Start
To register data at the Fujitrax Verifier, read the “5” barcode with the [Main Menu] displayed
in the Handy Scanner dialog box.
Handy Scanner’s Main Menu