CP-7-series Verification System Instruction manual(2.0E).pdf - 第111页

13. Offline Changeovers Edition 2.0 100 CP-7-series V erification System Instruction Manual 4. At Fujitrax V erifier , select whether the device table V erification operation was based on the current pr oduction recipe o…

13. Offline Changeovers

Edition 2.0 99 CP-7-series Verification System Instruction Manual

13.2 Operation Conditions

The following conditions must be satisfied at Fujitrax Verifier in order to mount a verified

device table on the machine without error.

• One of the following part verification system settings must be specifed: [Use Handy

Terminal], [Use Setup Sensor and LED] and [Use Fujitrax Verifier].

• Verification of the pallet must be completed at Fujitrax Verifier.

13.3 Mounting the Device Table

1. Use Fujitrax Verifier to ready a verified (Verification operation) device table.

2. Place the readied device table near the machine.

3. At the PDT-3100’s [Main Menu], select [PALLET SUPPLY].

At the Handy Scanner’s [Main Menu], select [UNIT SUPPLY].

PDT-3100’s Main Menu

Handy Scanner’s Main Menu

ENTER

[MAIN MENU]

1. VERIFY CHECK

2. PRE VERIFY CHECK

3. SET VERIFY RECIPE

4. PALLET SUPPLY

5. TEST READ

SELECT NO.=v

▼▲

CP7V0025

13. Offline Changeovers

Edition 2.0 100 CP-7-series Verification System Instruction Manual

4. At Fujitrax Verifier, select whether the device table Verification operation was based on

the current production recipe or the next production recipe. (If the next production

recipe is not selected, only the current production recipe name displays.)

PDT-3100’s Pallet Supply Selection Screen

Handy Scanner’s Pallet Supply Selection Screen

ENTER/QUIT:

[PALETTE SUPPLY]

Fore :Recipe1

Pre :Recipe2

▼▲

CP7V0026a

▼

13. Offline Changeovers

Edition 2.0 101 CP-7-series Verification System Instruction Manual

5. Use Handy Terminal to read the unit ID attached to the device table.

PDT-3100’s Unit ID Reading Screen

Handy Scanner’s Unit ID Reading Screen

ENTER/QUIT:

[PALETTE SUPPLY]

Recipe: Recipe1

READ UNIT ID LABEL

UNIT ID=v

CP7V0027a

▼