CP-7-series Verification System Instruction manual(2.0E).pdf - 第11页
Safety Labels Edition 2.0 viii CP-7-series V erification System Instruction Manual Notes:
Safety Labels
Edition 2.0 vii CP-7-series Verification System Instruction Manual
Safety Labels
To warn the operator of hazards, safety labels are attached to the barcode camera at the
positions indicated in the figure below.
Familiarize yourself with each label and its message before operating the machine.
CAUTION
Laser radiation
when open.
Do not stare
into beam.
Side view Front view
CP7V0096E
LASER RADIATION
DO NOT STARE INTO BEAM
Maximum output 1.2mW
Pulse duration 127 µS
Emitted wavelengh 670nm
in conformity to IEC825-1 11.1993
CLASS 2 LASER PRODUCT
1
2
3
1
23
Safety Labels
Edition 2.0 viii CP-7-series Verification System Instruction Manual
Notes:
1. Introduction
Edition 2.0 1 CP-7-series Verification System Instruction Manual
1. Introduction
1.1 About This Manual
This manual describes how to use the parts vefirication system on CP-7-series machines.
1.2 Terminology
Term
Verification This function verifies that the correct parts are set on the
device table (parts which the current recipe requires).
Device check This function checks each device status, verifying that it is
ready for production
HT Handy Terminal
Off-machine changeover This refers to device table setups which are performed with
the device table off the machine. A spare device table can
be set up off the machine for the next production while the
machine is still performing the current production. The setup
and device check are completed in advance on the spare
device table, thus shortening the time required for changeovers.
Next production
verification
The next recipe scheduled for production can be selected,
and verification can be performed in advance for that recipe,
thereby reducing the changeover time.
Description
FIDL This is the Feeder ID number.
DID While the device comment indicates the part type, the DID
represents the ID of each individual reel. Therefore, different
DIDs must be specified for each reel even if the part type is the
same (same device comment) at all these reels.
VT001Ea