CP-7-series Verification System Instruction manual(2.0E).pdf - 第66页

9. Using The Normal V erification Mode Edition 2.0 55 CP-7-series V erification System Instruction Manual 9.4 Normal V erification Procedure 5 The normal verification mode is inoperative in this configuration because the…

9. Using The Normal Verification Mode

Edition 2.0 54 CP-7-series Verification System Instruction Manual

9.3.8 All LEDs ON at Stage to be Verified

LEDs for all slots to be verified at the current verify subject stage are on.

Data flow

The position where the feeder was set and the device comment read by Handy Terminal

is checked against the recipe to determine if the data matches.

1 1 aaaaa

1 2 bbbbb

2 1 ccccc

2 2 ddddd

Stage Slot Comment DIDFIDL

Stage Slot Comment

CP7V0017E

Production Program

Specifications:

Acquired Data:

(4) Comparison

Stage

Slot

Comment

Production Program

(1) Production Program Analysis

(2) Device Comment Readings

(3) Feeder Settings

9. Using The Normal Verification Mode

Edition 2.0 55 CP-7-series Verification System Instruction Manual

9.4 Normal Verification Procedure 5

The normal verification mode is inoperative in this configuration because the Handy Terminal

is not used. Only the quick verification mode is operative.

For details concerning the quick verification procedure for this configuration, refer to the

“Quick Verification Procedure 1” section.

9.5 Normal Verification Procedure 7

The normal verification mode is inoperative in this configuration because the Handy Terminal

is not used. Only the quick verification mode is operative.

For details concerning the quick verification procedure for this configuration, refer to the

“Quick Verification Procedure 3” section.

9.6 Normal Verification Procedure 8

9.6.1 Operation Flowchart

When automatic operation begins following a device check, the feeder ID is read first,

then the feeder / reel combination information and other device information such as the

“remaining parts count”, etc., is downloaded from Fujitrax Verifier.

CP7V0011Ea

: Operator tasks

: Machine processing

Unshaded box

Shaded box

Device check start

Recipe switching

Device check

Part supply

Parts out occurrence

Automatic operation start

(START button pressed)

Mismatch

Checked against Verifier database

Feeder ID reading

Production start

The device check procedure is explained later

Match

9. Using The Normal Verification Mode

Edition 2.0 56 CP-7-series Verification System Instruction Manual

9.6.1.1 Recipe Switching

• The recipe is switched.

9.6.1.2 Device Check

• Device check is performed (see following pages for details).

• An “Unread FIDL” status displays at the device check screen after a device check is

completed for a slot.

• The “Unread FIDL” status changes to a “Parts Present” status following Fujitrax

Verifier verification at slots where feeder ID reading is completed without error.

9.6.1.3 Automatic Operation Start

• Automatic operation begins.

9.6.1.4 Feeder ID Reading

• The camera at ST1 reads the feeder IDs affixed to each feeder.

• Feeder ID reading occurs only at slots where an “Unread FIDL” status exists.

• The “Unread FIDL” status changes to a “Unread HOST” status at slots where

feeder ID reading is completed without error.

9.6.1.5 Check Against Fujitrax Verifier Database

• The feeder/reel combination data read by the Fujitrax Verifier is checked against

the feeder/reel combination data in the Fujitrax Verifier database to see if it

matches.

• “Remaining parts count” information for each reel is downloaded from Fujitrax

Verifier.

9.6.1.6 Production Start

• Production is started automatically.

9.6.1.7 Part Supply

• Parts are supplied.