CP-7-series Verification System Instruction manual(2.0E).pdf - 第123页

15. Explanation of Operation Screens Edition 2.0 112 CP-7-series V erification System Instruction Manual 15. Explanation of Operation Screens The machine operation screens used for the Part V erification operation are ex…

100%1 / 131
14. Registering Data at Fujitrax Verifier
Edition 2.0 111 CP-7-series Verification System Instruction Manual
14.5.5 Complete the part information registration operation
Read the "8" barcode to select the "8. Setting Completed" item and complete the part
information registration operation.
15. Explanation of Operation Screens
Edition 2.0 112 CP-7-series Verification System Instruction Manual
15. Explanation of Operation Screens
The machine operation screens used for the Part Verification operation are explained below.
15.1 [Version Up] Screen
Function
Displays the version number and upgrades the version of the control programs in PDT-3100
and setup sensor & LED sequencer.
Screen access
• To display this screen, execute the [Maintenance] - [Version Up]
- [Maintenance for Each Machine] commands.
• The display content of this screen varies according to the part verification system
settings specified at the [Parts Administration System] screen.
When “Use Handy Terminal” is ON:
Only the "Handy Terminal" section displays at the [Version Up] screen.
When [Use Setup Sensor and LED] is ON:
Only the "Feeder monitoring sequencer" section displays at the [Version Up] screen.
15. Explanation of Operation Screens
Edition 2.0 113 CP-7-series Verification System Instruction Manual
Screen access
Screen Explanation