N7201A304E05(1)_0.pdf - 第25页
NPM Safety Precautions EJM9BE-SF-01N-21 Page S-15 CAUTION M27SC There is a risk of an electric shock, electrical leakage, or malfunction. Do not give a shock to the electrical equipment. M125ESB Y our hands and fingers m…
NPM
Safety Precautions
Page S-14 EJM9BE-SF-01N-21
CAUTION
Do not put any objects
around emergency
stop switches.
You will be unable to press the
switch to stop the machine in
case of emergency.
M15ESxx
Be careful when
handling feeders.
A large feeder is so heavy that
it may be damaged or injure
you if it is dropped.
z Handle it properly following
the instruction manual.
M25ESC
Risk of injury of your head or
eyes during work.
Wear a cloth hat or a
hard hat and protective
goggles during
maintenance work
NPM
Safety Precautions
EJM9BE-SF-01N-21 Page S-15
CAUTION
M27SC
There is a risk of an electric
shock, electrical leakage, or
malfunction.
Do not give a shock to
the electrical
equipment.
M125ESB
Your hands and fingers may be
injured by the sheet metal etc.
Hold the specified parts
with both hands when
handling feeders.
NPM
Safety Precautions
Page S-16 EJM9BE-SF-01N-21
CAUTION
M39ESC
If you fail carry out periodic inspection and
maintenance, the machine cannot exhibit its true
performance or may break down
.
z Periodic inspection and maintenance should be
carried out by a trained person in charge of
maintenance according to the instructions in the
MAINTENANCE MANUAL.
Carry out periodic inspection and
maintenance.
M112ESB
Failure to observe the precautions described on
“MATERIAL SAFETY DATA SHEET” can cause
injuries or damages by chemical substances.
z See “MATERIAL SAFETY DATA SHEET” at
the end of the MAINTENANCE MANUAL.
Observe the precautions described on
“MATERIAL SAFETY DATA SHEET.”