N7201A304E05(1)_0.pdf - 第56页

NPM Safety Precautions Page S-46 EJM9BE-SF-03N-20 Handling of SD card The data for this machine, whi ch are managed in the machine’s memory ba sically, can also be saved to and loaded from SD card if nece ssary. In order…

100%1 / 170
NPM
Safety Precautions
EJM9BE-SF-02N-24 Page S-45
Handling of the wireless scanner
The handy scanner complies with IEC60825-1 Class 2 laser product.
Follow the rules below when using it.
1. The alignment beam (laser light) is emitted from the upper scan window when you
push the scan button.
Do not peer into the alignment beam. The eyes can be damaged.
2. Do not emit the alignment beam toward other peoples’ eyes.
The eyes can be damaged.
3. The alignment beam is emitted when it is disassembled. Do not disassemble it.
The alignment beam
(Shape of irradiated subject)
Scan window
NPM
Safety Precautions
Page S-46 EJM9BE-SF-03N-20
Handling of SD card
The data for this machine, which are managed in the machine’s memory basically, can also be saved to
and loaded from SD card if necessary.
In order to protect important data, this section describes the
instructions for protection and handling of SD card.
NOTICE
SD cards available to this machine
RP-SD064BL1A
(64MB)
RP-SD128BL1A (128MB)
RP-SDR256BJ1A (256MB)
RP-SDR512J1A (512MB) Manufactured by Panasonic Corporation
RP-SDH256N1A (256MB)
RP-SDK512J1A (512MB)
<Note>
SDHC memory cards are not supported.
Write protection
It is possible to mechanically protect the stored data from an accidental erasure or rewrite.
∗
Write protection is implemented by sliding the write protect tab of SD card as follows.
EJP1A-001E
NPM
Safety Precautions
EJM9BE-SF-03N-20 Page S-47
Handling precautions
NOTICE
In handling SD cards, be sure to observe the following items.
Do not give a severe shock, bend, drop, and wet.
LOCK
EJP1A-108E
Avoid placing heavy objects on the disk. Avoid applying an excessive force to the disk.
LOCK
Do not touch metal
terminals by hand or
metal.
EJP1A-103E
EJP1A-104E
Avoid storing and leaving the medium in areas exposed to
the following conditions.
Avoid using such a case as is not provided for
storage and carrying.
LOCK
High or low temperature
High humidity
Dusty
Direct sunlight
Corrosive gas
LOCK
EJP1A-107E
SD card
Case
EJP1A-105E
While the drive access indicator lamp is lit, avoid ejecting SD card or turning off the power supply.
Access indicator lamp