N7201A304E05(1)_0.pdf - 第65页
NPM LNB EJM9BE-MB-01L-20 Page 1-1 1. GENERAL DESCRIPTION
NPM
Safety Precautions
Page S-54 EJM9BE-SF-03N-20
Guidelines on using the machine
1. The machine, LNB, and NPM-DGS are the equipment to be connected
to LAN.
Use them on your company’s LAN (intranet).
2. Do not reveal the equipment-operating passwords to others.
3. When sending the PC for LNB, NPM-DGS, etc. to a repair shop or
disposing of it, pull out the hard disk or format the hard disk
beforehand.
4. If you used an SD card in the case of emergency operation due to
network troubles, delete its contents when normal operation is
resumed.
∗
Failure to comply could result in the leakage of user ID, password, and your production data to a
malicious outsider.
∗
The information recorded in an SD card may not be completely deleted through the basic
function of the operating system. Therefore, you are recommended to use commercial software
for complete deletion.
The machine refers to the NPM machine main body.
LNB is a relay system connecting the machine and NPM-DGS.
NPM-DGS refers to the production-data generation system.
For information about how to remove a hard disk from your computer or initialize a hard
disk, refer to its instruction manual or contact the manufacturer.
NPM
LNB
EJM9BE-MB-01L-20 Page 1-1
1. GENERAL DESCRIPTION
NPM
LNB
1.1 Conveyors
Page 1-2 EJM9BE-MB-01L-20
1.1 Conveyors
NPM, regardless of stand-alone or connected to the line, needs to be installed with another NPM
or an extension conveyor on its both sides, which is used to install a unit as a line server and
ensures the safety around the transport apertures.
The types of extension conveyors are as follows.
Name
Model name
Model number Descriptions
Appearance
NPM LNB
conveyor
NL-CON1 NM-EJK4A This has a function to ensure the
safety around the transport aperture
as an extension conveyor, and the
HUB (LAN interface). If you
incorporate an FA PC, it will have an
LNB function as a line server. Install
it on the extreme left of an NPM line.
NPM HUB
conveyor
NH-CON1 NM-EJK5A This has a function to ensure the
safety around the transport aperture
as an extension conveyor, and the
HUB (LAN interface). When more
than 16 NPM are coupled, install it
on the extreme right.
NPM
conveyor L
N-CONL1 NM-EJK6A This has a function to ensure the
safety around the transport aperture
as an extension conveyor. This is
required when a machine other than
NPM is coupled on the left of NPM.
NPM
conveyor R
N-CONR1 NM-EJK7A This has a function to ensure the
safety around the transport aperture
as an extension conveyor. This is
required when 15 machines or less
are coupled in an NPM line and
when a machine other than NPM is
coupled on the right of NPM.
∗
See the introduction manual for the installation.