N7201A304E05(1)_0.pdf - 第26页
NPM Safety Precautions Page S-16 EJM9BE-SF-01N-21 CAUTION M39ESC If you fail carry out periodic inspection and maintenance, the machine cannot exhibit its true performance or may break down . z Periodic inspection and ma…
NPM
Safety Precautions
EJM9BE-SF-01N-21 Page S-15
CAUTION
M27SC
There is a risk of an electric
shock, electrical leakage, or
malfunction.
Do not give a shock to
the electrical
equipment.
M125ESB
Your hands and fingers may be
injured by the sheet metal etc.
Hold the specified parts
with both hands when
handling feeders.
NPM
Safety Precautions
Page S-16 EJM9BE-SF-01N-21
CAUTION
M39ESC
If you fail carry out periodic inspection and
maintenance, the machine cannot exhibit its true
performance or may break down
.
z Periodic inspection and maintenance should be
carried out by a trained person in charge of
maintenance according to the instructions in the
MAINTENANCE MANUAL.
Carry out periodic inspection and
maintenance.
M112ESB
Failure to observe the precautions described on
“MATERIAL SAFETY DATA SHEET” can cause
injuries or damages by chemical substances.
z See “MATERIAL SAFETY DATA SHEET” at
the end of the MAINTENANCE MANUAL.
Observe the precautions described on
“MATERIAL SAFETY DATA SHEET.”
NPM
Safety Precautions
EJM9BE-SF-02N-24 Page S-17
Labels pasted on product for safety
Danger labels
The warning labels are pasted on this machine as follows.
Follow the instructions on each label.
If it has come off, place an order with us for it, referring to its label No. in the Parts List; then, put the new
one on the proper location.
Warning label locations on the front side
Warning label locations on the rear side
EJM9B-AA01
On the feeder cove
r
EJM9B-AC01
On the feeder cove
r