CP43操作手册.pdf.pdf - 第114页
Chapter 6 Nozzle Statistical Processing Part 2 2 – 46 V ersion 2.0 FCP IV -3 Operation
Chapter 6 Nozzle Statistical ProcessingPart 2
6.2.6 Points to Remember When Using Nozzle Skip
When the nozzle skip function executes, the sequence for the
nozzle being skipped will also be included in things such as
recovery so that the time required to process each board will
increase.
When the manual skip is set during a sequence, the manual skip
will be performed and the part will be wasted. To avoid this, set
the skip function after a sequence has finished.
2 – 45Version 2.0
FCP IV-3 Operation
Chapter 6 Nozzle Statistical ProcessingPart 2
2 – 46Version 2.0
FCP IV-3 Operation
Chapter 7 Fiducial Mark Recovery CommandPart 2
7. Fiducial Mark Recovery Command
If any part is placed on a fiducial mark, or the board geometry prevents proper
reading of a fiducial mark, production may be stopped. Production can be
restarted by setting the Proper data so that a fiducial mark read sequence is
automatically skipped or by manually entering the coordinates of the fiducial
mark.
This function is available only for a fiducial mark.
From hereon, this function will be called Mark editor.
7.1 How to Enter the Mark Editor Screen
If a fiducial mark read error occurs, display the Mark Editor screen either
by specifying the Proper data and pressing the Reset switch, or manually
selecting commands.
To display the Mark Editor screen, specify 11: Machine_Status A in
Proper data as described in 7.2, Proper Data Setting.
To display the Mark Editor screen by entering commands, Proper data
setting is not required.
7.2 Proper Data Setting
Proper data setting to display the Mark Editor screen just by pressing
Return after a mark read error occurs:
Proper data to be set: 11: Machine_Status A
Enter as follows: XXXX XXXX XXXX XXX1
(Set the last bit to "1".)
2 – 47Version 5.0
FCP IV-3 Operation