CP43操作手册.pdf.pdf - 第219页
• Action of the Function Keys PICKUP POS. : Press to set the standar d parts pickup position in Proper data. ORIGIN : Press to set the D axes Resupply position in Proper data. MAX LIMIT : Press to set the D and Z axes&ap…
• Action of the Function Keys
SET : Press to set the relevant Proper data.
RETURN : Press to return to Page 532/000.
• First Status Area
The relevant X0/Y0, YL/YL, XPCB/YPCB, Xmax/Ymax and
Xmin/Ymin values are displayed here.
• Second Display Area
If start conditions are fulfilled, the message “Press START”
flashes. Otherwise an error displays. Refer to Part 6 for details
on error codes.
• Function Key Menu
Chapter 3 Description of Commands
To Page 532/000
Setting Proper Data for
X, Y Axis
Part 3
3 – 93
Page
532 100
SET RETURN
Version 5.0
FCP IV-3 Operation
• Action of the Function Keys
PICKUP POS. :Press to set the standard parts pickup
position in Proper data.
ORIGIN :Press to set the D axes Resupply position in
Proper data.
MAX LIMIT :Press to set the D and Z axes' positive stroke
in Proper data.
MIN LIMIT :Press to set the D and Z axes' negative stroke
in Proper data.
RETURN :Press to return to Page 530/000.
• First Display Area
Proper Data
D Axis PICKUP POS..T1 : 2474 Mode : 1
PICKUP POS. T2 : 58474 Servo Counter
D1 ORIGIN : 116208 X 000000
D2 ORIGIN : -390 Y 000000
Origin Pos. Z0 : 0 C 359880
Max Limit Pos. D1max : 500 D1 -482476
D2max : 492756 D2 -000001
Zmax : 1000 Z 000000
Min Limit Pos. D1min : -492531 FQ 000005
D2min : -500 World (Zero)
Zmin : -3000
For detailed information on Proper data measurement refer to the FCP IV-3
Maintenance Manual.
• Function Key Menu
Chapter 3 Description of Commands
To Page 533/100
To Page 533/200
To Page 533/300
To Page 533/400
To Page 530/000
Setting Proper Data for
D1, D2, and Z Axis
Part 3
3 – 94
D1/D2/Z
Page
533 000
PICKUP POS. ORIGIN MAX LIMIT MIN LIMIT RETURN
Version 5.0
FCP IV-3 Operation
• Action of the Function Keys
PICKUP T1 :Press to set the pickup position T1 calibration
results into Proper data.
PICKUP T2 :Press to set the pickup position T2 into
Proper data.
Note: Pressing either of the above commands will display "SET."
Press [SET] to set the Proper data.
RETURN :Press to return to Page 533/000.
• First Display Area
Proper Data
D Axis PICKUP POS..T1 : 2474 Mode : 1
PICKUP POS. T2 : 58474 Servo Counter
D1 ORIGIN : 116208 X 000000
D2 ORIGIN : -390 Y 000000
Origin Pos. Z0 : 0 C 359880
Max Limit Pos. D1max : 500 D1 -482476
D2max : 492756 D2 -000001
Zmax : 1000 Z 000000
Min Limit Pos. D1min : -492531 FQ 000005
D2min : -500 World (Zero)
Zmin : -3000
For detailed information on setting Proper data refer to the FCP IV-3 Maintenance
Manual.
• Function Key Menu
Chapter 3 Description of Commands
To Page 533/110
To Page 533/110
To Page 533/000
Measuring D Axis Part Pickup
Standard Position
Part 3
3 – 95
PICKUP POS
Page
533 100
PICKUP T1 PICKUP T2 RETURN
Version 5.0
FCP IV-3 Operation