CP43操作手册.pdf.pdf - 第258页
Chapter 2 Details of Proper Data Part 4 7: Y ellow_Flash 0000 0000 0000 0000 # This sets the conditions under which the yellow light on the signal tower will flash (input as a 16 bit binary mask pattern). The standard se…
Chapter 2 Details of Proper DataPart 4
2. Details of Proper Data
The following symbols are used after the Proper data values.
✩: Varies from machine to machine. Must be measured.
❈: Cannot be changed by the user.
#: Can be changed by the user.
@: Machine automatically changes this. (Sometimes the user can also.)
$: Not currently in use.
The meaning of each Proper data item is described in this chapter. Please refer
to this chapter when setting Proper data at the MCS 30 computer.
Detailed Explanation
1: ID_Code[8] ASCII CODE #
This is a user selected ID code.
Here, an ASCII code is entered, and this becomes a password. There is no
standard setting. Choose a number up to 8 digits.
2: Language English: Japanese: French #
This sets the language used on the display monitor. After changing this
setting, the user must turn the power off, and restart the machine before the
change will take effect. Generally, the setting is Japanese in Japan and
English elsewhere. French is not supported.
3: Red_Light 0000 0000 0000 0000 #
This sets the conditions under which the red light on the signal tower will
turn on (input as a 16 bit binary mask pattern). The standard setting is
0000 0100 0000 0000.
4: Yellow_Light 0000 0000 0000 0000 #
This sets the conditions under which the yellow light on the signal tower
will turn on (input as a 16 bit binary mask pattern). The standard setting is
0000 0011 0010 0100.
5: Blue_Light 0000 0000 0000 0000 #
This sets the conditions under which the blue light on the signal tower will
turn on (input as a 16 bit binary mask pattern). The standard setting is
0000 0011 0010 0100.
6: Red_Flash 0000 0000 0000 0000 #
This sets the conditions under which the red light on the signal tower will
flash (input as a 16 bit binary mask pattern). The standard setting is
0000 0000 0000 1000.
4 – 19Version 5.0
FCP IV-3 Operation
Chapter 2 Details of Proper DataPart 4
7: Yellow_Flash 0000 0000 0000 0000 #
This sets the conditions under which the yellow light on the signal tower
will flash (input as a 16 bit binary mask pattern). The standard setting is
0010 0000 0001 0010.
8: Blue_Flash 0000 0000 0000 0000 #
This sets the conditions under which the blue light on the signal tower will
flash (input as a 16 bit binary mask pattern). The standard setting is
0000 1000 1100 0001.
Signal Tower Setting Method
Fuji uses the following standards for signal tower operation.
Automatic operation.........................................Blue (Green) Light
Loader operating...............................................Blue (Green) Light
Waiting for PCB.................................................Blue (Green) Flash
Waiting for NEXT..............................................Blue (Green) Flash
Out of parts soon...............................................Blue (Green) Light
..............................................................................Yellow Light
Out of parts: machine stopped........................Yellow Flash
Abnormal occurrence: machine stopped.......Red Flash
Statistical Error Alarm......................................Blue (Green) Light
..............................................................................Yellow Flash
In changeover: operator called .......................Yellow Flash
Vision process error ..........................................Red Light
Machine waiting................................................Blue (Green) Flash
In changeover ....................................................Blue (Green) Flash
Production complete: machine stopped........Yellow Flash
Version 5.0 4 – 20
FCP IV-3 Operation
Chapter 2 Details of Proper DataPart 4
The bit map and the corresponding display is shown below.
Display Bit map Hexadecimal
Reserved 1000 0000 0000 0000 0x8000
Reserved 0100 0000 0000 0000 0x4000
Production complete: machine stopped 0010 0000 0000 0000 0x2000
Reserved 0001 0000 0000 0000 0x1000
In changeover 0000 1000 0000 0000 0x800
Vision process error 0000 0100 0000 0000 0x400
Automatic operation 0000 0010 0000 0000 0x200
Loader operating 0000 0001 0000 0000 0x100
Waiting for PCB 0000 0000 1000 0000 0x80
Waiting for NEXT 0000 0000 0100 0000 0x40
Out of parts soon 0000 0000 0010 0000 0x 20
Out of parts: machine stopped 0000 0000 0001 0000 0x10
Abnormal occurrence: machine stopped 0000 0000 0000 1000 0x8
Statistical Error Alarm 0000 0000 0000 0100 0x4
In changeover: operator called 0000 0000 0000 0010 0x2
Machine waiting 0000 0000 0000 0001 0x1
Example: This is the Fuji standard signal tower blue flash setting
Machine waiting 0000 0000 0000 0001
Waiting for NEXT 0000 0000 0100 0000
Waiting for PCB 0000 0000 1000 0000
In changeover +0000 1000 0000 0000
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Total 0000 1000 1100 0001
The user may set his own standards in this manner.
9: User_Define A 0000 0000 0000 0000 $#
This sets whether or not a buzzer sounds when a defined signal tower lamp
if lit (input as a 16 bit binary mask pattern). It is entered in the same way as
shown in the example above.
4 – 21Version 5.0
FCP IV-3 Operation