CP43操作手册.pdf.pdf - 第289页
Part Five V ision Processing
Chapter 2 Details of Proper DataPart 4
Version 5.0 4 – 50
FCP IV-3 Operation
Part Five
Vision Processing
Chapter 1 Trace ModePart 5
1. Trace Mode
The vision trace function permits the user to observe vision processing in
progress. This function can thus be used to confirm whether the data created
for vision processing does infact allow vision processing to be carried out
correctly.
For a detailed explanation of vision processing and device descriptions, refer to
the Vision Processing Maintenance Manual.
1.1 Trace Mode Setting
The general procedure for running a vision trace is described below.
(1) Press [SET], [MANUAL] [VISION] and [TOOL]. An ID code must be
entered to access vision. When the ID code is entered, the function
key menu changes.
(2) Press [TRACE] and the vision trace display appears.
VISION TRACE STATUS
No
0 Result OFF
1 Tole OFF
2 Window OFF
3 Point OFF
4 Line OFF
5 RS232C OFF
6 * * * * * * * *
7 * * * * * * * *
8 * * * * * * * *
9 * * * * * * * *
Mode
No Mode
10 * * * * * * * *
11 * * * * * * * *
12 * * * * * * * *
13 Color OFF
14 Detail OFF
15 Pause OFF
16 Clp OFF
17 Place OFF
18 Results OFF
19 Timers OFF
No
20 Inspect OFF
21 * * * * * * * *
22 * * * * * * * *
23 * * * * * * * *
24 Clp * * *
25 Blob OFF
26 Agf OFF
27 BT OFF
28 * * * * * * * *
29 * * * * * * * *
30 Acqtime OFF
31 Instime OFF
select No
▲▼ON / OFF QTY.CLEAR THROUGH RETURN
PAGE 522
Operation : FRONT
Ready
Page 522
DEVICE F_MARK B_MARK TRACE RETURN
5 – 1Version 2.0