CP43操作手册.pdf.pdf - 第157页
• Action of the Function Keys MODE 1 : Press to display 10 consecutive devices regar dless of whether each device is used or not. MODE 2 : Press to display only those devices that ar e to be used. MODE 3 : Press to displ…
• Action of the Function Keys
CHECK : Press to check the parts mounted on the device
table for the current production program.
OFFSET : Press to set an offset for any device requiring it.
For example, if a part is being mispicked due to
slippage, it may require an offset to align the
center of the nozzle with the center of the part.
RETURN : Press to return to Page 400/000.
• First Status Area
DEVICE CHECK
• Function Key Menu
Chapter 3 Description of Commands
To Page 451/000
To Page 455/000
To Page 400/000
Working with Device Data
Part 3
3 – 31
DEVICE
Page
450 000
CHECK OFFSET RETURN
Version 5.0
FCP IV-3 Operation
• Action of the Function Keys
MODE 1 : Press to display 10 consecutive devices
regardless of whether each device is used or
not.
MODE 2 : Press to display only those devices that are to
be used.
MODE 3 : Press to display only those devices among the
devices being used that have a condition such
as "Un Set", "Parts E", "Pickup", or "Vision".
RETURN : Press to return to Page 450/000.
• First Status Area
DEVICE CHECK
• First Display Area
(a) (b) (c) (d)
D001 Un Set [0013] Device_comment_No_1
D002 Parts E [0008] Korewa_No2_Desu
D003 [0002] PCPR102TL
D004 [0000]
D005 Vision [0001] MSD2HD256
D006 Tape E [0005] Micro_Tr_Nol
D007 Next d [0000] Super_Mini_Tr
D008 [0002] Nihongonetute
D009 Pickup [0003] N3456Sd23
D010 [0015] Jaf
• Function Key Menu
Chapter 3 Description of Commands
To Page 451/100
To Page 451/200
To Page 451/300
To Page 450/000
Device Check Mode Selection
Part 3
3 – 32
CHECK
Page
451 000
MODE 1
MODE 2
MODE 3
RETURN
Version 5.0
FCP IV-3 Operation
FCP IV-3 Operation
(a) : Device number
(b) : Parts status
Un Set (yellow display) : Parts not yet checked.
Blank (green display) : Parts set
(blue display) : Device previously used is not to be used this time.
Next D (magenta display): Set as next device but not checked
Tape E (white display) : End of tape detected
Parts E (red display) : Out of parts
Pickup (highlighted in yellow) : Parts mispicked
Vision (purple) : Vision processing error
(c) : Number of parts per board
(d) : Device comment
Chapter 3 Description of Commands
Part 3
3 – 33
Version 5.0