CP43操作手册.pdf.pdf - 第169页

• Action of the Function Keys MCS : Press to alternate the communication mode with the MCS 30 computer between the following two settings: Local: Only Status data, Pr oper data and programs can be sent fr om the MCS 30 c…

100%1 / 364
• Action of the Function Keys
CHANGE : Press to alternate between the 3 possible table
modes (joint, device change and changeover).
Joint mode : The two tables move jointly to
essentially form one table with 160
devices.
2A 1A : One device table is used as the
spare table.
2A 1B : Only one table operates at any one
time. Each table operates for a
separate program.
TABLE 2 : Press to set the left table as the original table.
TABLE 1 : Press to set the right table as the original table.
RETURN : Press to return to Page 510/000.
Note: Except for the use of the D RESUPPLY command on Page
554/000, device tables change only during automatic
operation. Device tables also change after the table mode has
been changed in the same manner as during automatic
operation.
• Function Key Menu
Chapter 3 Description of Commands
To page 510/000
Selecting the Table Mode
for Production
Part 3
3 – 43
TABLE MODE
Page
514 000
CHANGE TABLE 2 TABLE 1 RETURN
Version 5.0
FCP IV-3 Operation
• Action of the Function Keys
MCS : Press to alternate the communication mode
with the MCS 30 computer between the
following two settings:
Local: Only Status data, Proper data and
programs can be sent from the MCS 30
computer.
Off Line: The FCP IV-3 can send production data
to the MCS 30 computer.
Note : The communication mode setting is saved when the power
supply is turned off. The communication mode can also be
changed by changing the Status data.
RETURN : Press to return to page 510/000.
• Function Key Menu
Chapter 3 Description of Commands
To Page 510/000
Changing Transmission Mode
Part 3
3 – 44
LINE
Page
515 000
MCS RETURN
Version 5.0
FCP IV-3 Operation
When HELPS compatible, the display changes.
• Action of the Function Keys
MCS : Press to switch the MCS communication mode
between the following two settings:
Local: Only Status data, Proper data and
programs can be sent from the MCS.
Off Line: The M/C can send production data to
the MCS.
Note : The communication mode setting is saved when the power
supply is turned off. The communication mode can also be
changed by changing the Status data.
LMS : Press to make LMS related changes. When this
key is pressed, the M/C requests an ID code. If
an improper ID code is input, the operator
cannot proceed.
RETURN : Press to return to page 510/000.
• Function Key Menu
Chapter 3 Description of Commands
To Page 510/000
Making Commands Related to
MCS and LMS
Part 3
3 – 45
LINE
Page
515 000
MCS LMS RETURN
Version 5.0
FCP IV-3 Operation