CP43操作手册.pdf.pdf - 第221页

• Action of the Function Keys SET : Press to set the value that has been measur ed in the relevant Pr oper data item. RETURN : Pr ess to return to Page 533/100, 200, 300 or 400. • First Status Area The relevant PICKUP PO…

100%1 / 364
• Action of the Function Keys
PICKUP T1 :Press to set the pickup position T1 calibration
results into Proper data.
PICKUP T2 :Press to set the pickup position T2 into
Proper data.
Note: Pressing either of the above commands will display "SET."
Press [SET] to set the Proper data.
RETURN :Press to return to Page 533/000.
• First Display Area
Proper Data
D Axis PICKUP POS..T1 : 2474 Mode : 1
PICKUP POS. T2 : 58474 Servo Counter
D1 ORIGIN : 116208 X 000000
D2 ORIGIN : -390 Y 000000
Origin Pos. Z0 : 0 C 359880
Max Limit Pos. D1max : 500 D1 -482476
D2max : 492756 D2 -000001
Zmax : 1000 Z 000000
Min Limit Pos. D1min : -492531 FQ 000005
D2min : -500 World (Zero)
Zmin : -3000
For detailed information on setting Proper data refer to the FCP IV-3 Maintenance
Manual.
• Function Key Menu
Chapter 3 Description of Commands
To Page 533/110
To Page 533/110
To Page 533/000
Measuring D Axis Part Pickup
Standard Position
Part 3
3 – 95
PICKUP POS
Page
533 100
PICKUP T1 PICKUP T2 RETURN
Version 5.0
FCP IV-3 Operation
• Action of the Function Keys
SET :Press to set the value that has been measured
in the relevant Proper data item.
RETURN :Press to return to Page 533/100, 200, 300 or
400.
• First Status Area
The relevant PICKUP POS, ORIGINAL, Max Limit, and Min
Limit values are displayed here.
• Second Display Area
SET PROPER will blink in green on the screen.
• Function Key Menu
Chapter 3 Description of Commands
To Page
533/100, 200,
300 or 400.
Setting D, Z Axis Proper Data
Part 3
3 – 96
PICKUP T1
Page
533 110
SET RETURN
Version 5.0
FCP IV-3 Operation
• Action of the Function Keys
D1 ORIGIN :Press to set the D1 origin calibration results
in Proper data.
D2 ORIGIN :Press to set the D2 origin calibration results
in Proper data.
Z0 :Press to set the Z0 calibration results into
Proper data.
Note: Pressing any of the above commands will display "SET."
Press [SET] to set the Proper data.
RETURN :Press to return to Page 533/000.
• First Display Area
Proper Data
D Axis PICKUP POS..T1 : 2474 Mode : 1
PICKUP POS. T2 : 58474 Servo Counter
D1 ORIGIN : 116208 X 000000
D2 ORIGIN : -390 Y 000000
Origin Pos. Z0 : 0 C 359880
Max Limit Pos. D1max : 500 D1 -482476
D2max : 492756 D2 -000001
Zmax : 1000 Z 000000
Min Limit Pos. D1min : -492531 FQ 000005
D2min : -500 World (Zero)
Zmin : -3000
For detailed information on setting Proper data refer to the FCP IV-3 Maintenance
Manual.
• Function Key Menu
Chapter 3 Description of Commands
To Page 533/110
To Page 533/110
To Page 533/110
To Page 533/000
Setting D, Z Axis
Origin Positions
Part 3
3 – 97
ORIGIN
Page
533 200
D1 ORIGIN D2 ORIGIN Z 0 RETURN
Version 5.0
FCP IV-3 Operation