CP43操作手册.pdf.pdf - 第173页
• Action of the Function Keys +P AGE : Press to display the next page of input signal statuses. -P AGE : Press to display the previous page of input signal statuses. ▲ : Press to move the cursor up one line. ▼ : Press to…
• Action of the Function Keys
IN : Press to check the input signals.
OUT : Press to check the output signals.
RETURN : Press to return to Page 520/000.
• First Status Area
I/O CHECK
• First Display Area
IN PORT OUT PORT
NO I NAME NO 0 NAME
X000 O EMERGENCY SW Y000 X START LAMP
ON
X001 X Press START Y001 X RESET LAMP
ON
X002 X RESET SW Y002 X BUZZER ON
X003 X CYCLE STOP SW Y003 X (RESERVE)
X004 X (RESERVE) Y004 X (RESERVE)
X005 X (RESERVE) Y005 X TIME COUNT
ON
X006 X Y006 X AUTO
OPERATION
X007 X Y007 X 1
Output signal names
0 : ON, X : OFF
This number is the out port address
Input signal names
• Function Key Menu
Chapter 3 Description of Commands
To Page 521/100
To Page 521/200
To Page 520/000
Checking Input and Output
Signals
Part 3
3 – 47
I/O
Page
521 000
IN OUT RETURN
Version 5.0
FCP IV-3 Operation
• Action of the Function Keys
+PAGE : Press to display the next page of input signal
statuses.
-PAGE : Press to display the previous page of input
signal statuses.
▲ : Press to move the cursor up one line.
▼ : Press to move the cursor down one line.
RETURN : Press to return to Page 521/000.
• Second Status Area
IO CHECK
Note: This page can be used for checking the status of the input
signals. Use the function keys to display the input signal to
be checked. The status of each signal changes to real time
when displayed. When the cursor is moved to the line of the
input signal to be checked, a buzzer sounds if the input signal
exists.
• Function Key Menu
Chapter 3 Description of Commands
To Page 521/000
Checking Input Signals
Part 3
3 – 48
IN
Page
521 100
+PAGE -PAGE
▲
▼
RETURN
Version 5.0
FCP IV-3 Operation
• Action of the Function Keys
+PAGE : Press to display the next page of output signal
statuses.
-PAGE : Press to display the previous page of output
signal statuses.
▲ : Press to move the cursor up one line.
▼ : Press to move the cursor down one line.
ON/OFF : The signal of the output address selected by the
cursor will be output. If the signal is being
output already then it will be cancelled.
RETURN : Press to return to Page 521/000.
• Second Status Area
IO CHECK
Note : Before exiting I/O mode, be sure to reset all the I/O settings
back to where they were before.
• Function Key Menu
Chapter 3 Description of Commands
To Page 521/000
Checking Output Signals
Part 3
3 – 49
OUT
Page
521 200
+PAGE -PAGE
▲ ▼
ON/OFF RETURN
Version 5.0
FCP IV-3 Operation