CP43操作手册.pdf.pdf - 第139页

FCP IV -3 Operation Chapter 3 Description of Commands Part 3 3 – 14 V ersion 5.0 Note: The pr oduction mode is automatically selected when the power supply is turned on. RETURN : Press to r eturn to Page 000/000. • ST AR…

100%1 / 364
• Action of the Function Keys
Cam Org. Pos : Press to return cam axis to its origin
position. While this key remains pressed
the cam will move toward its origin
position. Movement stops when the cam
returns to its origin. Movement also stops if
the key is released before the cam reaches
its origin.
The message "Return Cam to Zero" displays
in the second display area until the cam
reaches its origin. When the cam has
returned the message "Press START"
displays.
MARK EDITOR: Fiducial Mark Recovery command.
This command is available only for a
program using a fiducial mark sequence.
SEQ. NO : Press to input the sequence number from
which operation is to be started.
MODE : Press to select the operation mode.
Production Parts are picked-up and placed (usual
operation).
Simulate Only the X, Y, D1, D2 axes operate. Boards
are loaded in and sent out (used for
checking loading position etc).
Idle This machine runs continuously without
bringing in or sending out boards. Vision
processing is not performed. At ST 1 and ST
7 the nozzle lowers. Run this mode without
any parts on the nozzles. This mode is not
for production.
• Function Key Menu
Chapter 3 Description of Commands
To Page 130/000
Automatic Operation
Part 3
3 – 13
AUTO
Page
100 000
Cam Org. Pos
MARK EDITOR SEQ. NO. MODE RETURN
Version 5.0
FCP IV-3 Operation
FCP IV-3 Operation
Chapter 3 Description of Commands
Part 3
3 – 14
Version 5.0
Note: The production mode is automatically selected when the power
supply is turned on.
RETURN : Press to return to Page 000/000.
• START Button
Pressing the [START] button begins automatic operation.
• First Status Area:
Auto
• Second Display Area
If start conditions are fulfiled, the message “Press START”
flashes. Otherwise an error displays.
To Page 000/000
To Page 170/000
• Action of Function Keys
RETURN : Press to cancel any entry on this screen and
return to Page 100/000.
• First Display Area
ST1 N 3 D 5 Er ···· Status
ST2 N 3 D 5 Er ···· P mode Product
ST3 N 3 D 5 Er ···· Recovery 3 Ttimes
ST4 N 3 D 5 Er ···· T mode Joint
ST5 N 3 D 5 Er 0
ST6 N 3 D 5 Er 0
ST7 N 3 D 5 Er 0
Input Mark Sequence No.
• First Status Area
MARK EDITOR
• Second Status Area
Sequence No:
After entering a sequence no., press Start to move the camera
just above the specified mark. After that, the screen changes to
the Mark Editor screen.
Refer to Part 2, Chapter 7, "Fiducial Mark Recovery Command"
for details.
• Function Key Menu
Chapter 3 Description of Commands
To Page 100/000
Recover from Fiducial Mark
Read Error
Part 3
3 – 15
MARK EDITOR
Page
130 000
RETURN
Version 5.0
FCP IV-3 Operation