CP43操作手册.pdf.pdf - 第227页
• Action of the Function Keys ▲ : Press to move the cursor up one line to the servo axis to be changed. ▼ : Press to move the cursor down one line to the servo axis to be changed. RETURN : Press to return to Page 540/000…
FCP IV-3 Operation
• First Display Area
Mode: 1
Servo Counter
X 000001
Y -00012
C 000000
D1 000007
D2 -00001
Z 000018
PQ -00036
World (Zero)
Note : The servo counter is automatically displayed when the command [SERVO] is
selected. Holding down the inching shift key ([F]) while pressing [RETURN] will
cause the servo counter display to remain on the monitor; otherwise, it is cleared
when this command page is exited.
Chapter 3 Description of Commands
Part 3
3 – 101
Version 5.0
• Action of the Function Keys
▲ : Press to move the cursor up one line to the
servo axis to be changed.
▼ : Press to move the cursor down one line to the
servo axis to be changed.
RETURN : Press to return to Page 540/000
• First Display Area
Inching Speed
X 005 [%]
Y 005 [%]
C 005 [%]
D1 005 [%]
D2 005 [%]
Z 005 [%]
FQ 005 [%]
• Input from Numerical Keypad
The inching speed can be entered in a range of 0 - 10 to change
the slow inching speed of an axis. A larger number will speed
up the inching speed.
After the power is cut these changes are retained in memory.
• Function Key Menu
Chapter 3 Description of Commands
To Page 540/000
Changing the Inching Speed
Part 3
3 – 102
SPEED
Page
541 000
▲ ▼
RETURN
Version 5.0
FCP IV-3 Operation
FCP IV-3 Operation
This command is enabled only when the machine is set to automatically adjust the
the conveyor width.
• First Display Area
CONV.WIDTH ✴✴✴✴✴✴
The current conveyor width is displayed in increments of 0.01 mm.
Using the [↑] and [↓] keys the conveyor width can be changed. Also, the width
can be entered in 0.01 mm increments using the numerical keypad.
Chapter 3 Description of Commands
Changing and Setting
Conveyor Width
Part 3
3 – 103
CONV.WIDTH
Page
542 000
Version 5.0