CP43操作手册.pdf.pdf - 第140页
• Action of Function Keys RETURN : Press to cancel any entry on this scr een and return to Page 100/000. • First Display Area ST1 N 3 D 5 Er ···· Status ST2 N 3 D 5 Er ···· P mode Product ST3 N 3 D 5 Er ···· Recovery 3 T…
FCP IV-3 Operation
Chapter 3 Description of Commands
Part 3
3 – 14
Version 5.0
Note: The production mode is automatically selected when the power
supply is turned on.
RETURN : Press to return to Page 000/000.
• START Button
Pressing the [START] button begins automatic operation.
• First Status Area:
Auto
• Second Display Area
If start conditions are fulfiled, the message “Press START”
flashes. Otherwise an error displays.
To Page 000/000
To Page 170/000
• Action of Function Keys
RETURN : Press to cancel any entry on this screen and
return to Page 100/000.
• First Display Area
ST1 N 3 D 5 Er ···· Status
ST2 N 3 D 5 Er ···· P mode Product
ST3 N 3 D 5 Er ···· Recovery 3 Ttimes
ST4 N 3 D 5 Er ···· T mode Joint
ST5 N 3 D 5 Er 0
ST6 N 3 D 5 Er 0
ST7 N 3 D 5 Er 0
Input Mark Sequence No.
• First Status Area
MARK EDITOR
• Second Status Area
Sequence No:
After entering a sequence no., press Start to move the camera
just above the specified mark. After that, the screen changes to
the Mark Editor screen.
Refer to Part 2, Chapter 7, "Fiducial Mark Recovery Command"
for details.
• Function Key Menu
Chapter 3 Description of Commands
To Page 100/000
Recover from Fiducial Mark
Read Error
Part 3
3 – 15
MARK EDITOR
Page
130 000
RETURN
Version 5.0
FCP IV-3 Operation
FCP IV-3 Operation
•Action of the Function Keys
RETURN : Press to return to Page 000/000.
• Second Status Area
Sequence No_
• Input from Numerical Keyboard
When this command is selected, the machine will wait for the operator to input a
sequence number. From the numerical keypad, input the sequence number from
which production is to be started and press the carriage return [CR] key.
The sequence number of a skipped sequence can be input. In this case, production
starts from the next non-skipped sequence following this number.
The sequence number must be input once again if the first sequence number input
exceeds the number of sequences in the program.
Chapter 3 Description of Commands
Inputting the Start Sequence
Number
Part 3
3 – 16
SEQ. NO
Page
140 000
Version 5.0