SIPLACE-SX4-DX4-用户手册.pdf - 第17页

Introduction 1.3.7 SIPLACE on the World Wide Web (WWW) Staff Qualifications a nd Training Service Manual SIPLACE SX4/DX4 17 1.3.7 1 . 3 . 7 S I P L A C E o n t h e W o r ld W id e W e b ( W W W ) SIPLACE on the Wor ld Wi…

Introduction

Other Instructions 1.3.5 Validity of Document

16 Service Manual SIPLACE SX4/DX4

1.3.4.5

1.3.4.5 Dispatching ESD Modules

Dispatching ESD Modules

► Always store modules and components in conductive packaging (e.g. metallized plastic bags or met-

al sleeves) and dispatch them in conductive packaging.

► If the packaging is not conductive, place the modules in a conductive envelope before packaging.

Use conductive foam rubber, ESD bags, domestic aluminum foil or paper, for example. NEVER use

plastic bags or film.

► If the module has integral batteries, ensure that the conductive packaging does not touch or short-

circuit the battery terminals and, if necessary, first cover the terminals with insulating tape or mate-

rial.

1.3.5

1.3.5 Validity of Document

Validity of Document

This document contains service work instructions for all SIPLACE SX4/DX4 machines.

The service work described in this manual is divided into modules and is largely identical for all machine

types:

▪ If the work required for specific machines should differ from the standard procedure, this will be in-

dicated with reference to the machine number, series and delivery state.

▪ Diagrams should be seen as examples e.g. the diagram of a machine with different paint finish does

not mean that the following information only applies to the machine type shown.

The main focus of this manual is on a description of mechanical service work.

Please refer to the circuit diagram folder for any electrical checks:

▪ SIPLACE SX4/DX4 detailed circuit diagrams [00196711-xx] (German/English)

1.3.6

1.3.6 Release History

Release History

Document

SIPLACE SX4/DX4

Service manual

Release Changes

07/2011 First edition

01/2014 Supplements and corrections:

▪ Modularization of head chapters

▪ Basic machine: setting the machine covers, guide rollers

▪ Electrics: motor contactor, jumper on the inrush current limitation board

▪ Pneumatics: sealing the screwed connections

▪ Calculating the Belt Tension

▪ Gantry: new incremental encoder, trailing cable gauge

▪ Conveyor: safety instructions for moving the sides, setting the lifting table paral-

lelism, new sonar sensor

▪ Component trolley: setting the actuator

▪ COT insert: jumper on the FCU

▪ Cutter: torques

▪ Various minor corrections

Introduction

1.3.7 SIPLACE on the World Wide Web (WWW) Staff Qualifications and Training

Service Manual SIPLACE SX4/DX4 17

1.3.7

1.3.7 SIPLACE on the World Wide Web (WWW)

SIPLACE on the World Wide Web (WWW)

Log into our SIPLACE

homepage at http://www.siplace.com.

► You can choose between the German and English versions.

The different sections contain information about our products, services and contact persons.

In addition, registered customers can also access the

SIPLACE User Group

. Here you can call up spe-

cial information about our placement systems e.g.

▪ Technical documentation,

▪ Technical information,

▪ Spare parts lists etc.

Registration for the user group is very simple:

► Click on the Register link.

► Fill in the registration form and send it off to us.

Soon afterwards, you will receive your access authorization with USER ID and password.

1.4

1.4 Staff Qualifications and Training

Staff Qualifications and Training

Qualified or adequately trained personnel means that these people are familiar with the setting up, op-

eration and maintenance of automatic placement systems and add-on devices and are suitably qualified,

e.g.:

▪ Have been trained, instructed or authorized to switch on and off, isolate, earth and identify electrical

circuits and system components in accordance with normal safety standards.

▪ Have been trained or instructed in the upkeep and use of appropriate safety equipment in accord-

ance with normal safety standards.

▪ Have received first aid training.

Introduction

Abbreviations 1.3.7 SIPLACE on the World Wide Web (WWW)

18 Service Manual SIPLACE SX4/DX4

1.5

1.5 Abbreviations

Abbreviations

Abbreviations Description

PA Placement area

CO Component

COT Changeover table

COT-i Changeover table insert

C&P Collect&Place

C&P20, CP20 Collect&Place head with 20 segments

CPP Collect&Pick&Place head

CPx Collective term for CPP and/or CP20

DC Dual conveyor with 2 lanes

ESD Electrostatic sensitive device

EMC Electromagnetic compatibility

SC Single conveyor with 1 lane

FHE Fast Head Exchange

PCB Board

NC Nozzle changer

P&P Pick&Place

QC Quad lane conveyor with 4 lanes

SCS Single Core Solution

TH TwinHead

VS Vision system