SIPLACE-SX4-DX4-用户手册.pdf - 第224页
Measuring Equipmen t and Tools Gauge for Stopper Setting [03067221-xx] 224 Service Manual SIPLACE SX4/DX4 4.13 4 . 1 3 G a u g e f o r S t o p p e r S e t t in g [ 0 3 0 6 7 2 2 1 - x x ] Gauge for Stopper Se tting [0306…
Measuring Equipment and Tools
Programming Cable for PXS240 Sensor [03073330-xx]
Service Manual SIPLACE SX4/DX4 223
4.10
4.10 Programming Cable for PXS240 Sensor [03073330-xx]
Programming Cable for PXS240 Sensor [03073330-xx]
4.11
4.11 Setting Gauge for Sonar Sensors [03048764-xx]
Setting Gauge for Sonar Sensors [03048764-xx]
4.12
4.12 Setting Gauge for Sonar Sensors [03076989-xx]
Setting Gauge for Sonar Sensors [03076989-xx]
Version 1 – UB-PROG4-V31 (old PXS240)
Version 2 – UB-PROG2
Setting gauge for ultrasonic sensors [03048764-xx]
Setting gauge for ultrasonic sensors in X quad lane, X op-
tions, SX series and SX options
Wen you place the gauge on the conveyor, make sure
that the designation for the relevant conveyor remains
visible.
▪ 3mm gap for the X conveyor
▪ 2mm gap for the SX conveyor
Measuring Equipment and Tools
Gauge for Stopper Setting [03067221-xx]
224 Service Manual SIPLACE SX4/DX4
4.13
4.13 Gauge for Stopper Setting [03067221-xx]
Gauge for Stopper Setting [03067221-xx]
4.14
4.14 Mapping Test Plate 520x300 mm [03067312-xx]
Mapping Test Plate 520x300 mm [03067312-xx]
4.15
4.15 Mapping Test Plate 560x460 mm [03076118-xx]
Mapping Test Plate 560x460 mm [03076118-xx]
4.16
4.16 ACT Calibration Plate, Single Set, for Quad Lane [03073073-xx]
ACT Calibration Plate, Single Set, for Quad Lane [03073073-xx]
Stopper setting gauge for fitting the stopper unit on the
holding bracket
A special mapping plate with a width of 300 mm has been
developed for the quad lane machines. These machines
can only be mapped with this mapping plate, as the con-
veyor can not be set to a width of 450 mm.
Mapping plate 560x460 mm
ACT calibration plate, single set, for quad lane
[03073073-xx]
Measuring Equipment and Tools
Service Box SIPLACE SX [03079042-xx]
Service Manual SIPLACE SX4/DX4 225
4.17
4.17 Service Box SIPLACE SX [03079042-xx]
Service Box SIPLACE SX [03079042-xx]
The SIPLACE SX service box [03079042-xx] contains the following items:
▪ Filter element 430 [03003717-xx]
▪ 20x SIPLACE cleansing tissue [00315253-xx]
▪ Grease gun with tube and nozzle 230 [00374563Sxx]
▪ Klüber BEM 34-132 lubricant grease, 1 kg tin [00374565-xx]
▪ Filter insert 5 micrometer for series 112 [00355386-xx]
▪ Key close handle [03038882-xx]
4.18
4.18 Universal Placement Head Mounting Rack [03056231-xx]
Universal Placement Head Mounting Rack [03056231-xx]
4.19
4.19 Read Head Test Device (Track Signal Tester) [03071361-xx]
Read Head Test Device (Track Signal Tester) [03071361-xx]
The universal placement head mounting rack is suitable
for TwinHead, C&P20, CPP, IC and DLM heads.
Read head test device [03071361-xx]