SIPLACE-SX4-DX4-用户手册.pdf - 第221页

Measuring Equipment and Tools Compressed Air Testing Device [00311487-01] Service Manual SIPLACE SX4/DX4 221 4.6 4 . 6 C o m p r e s s e d A ir T e s t in g D e v ic e [ 0 0 3 1 1 4 8 7 - 0 1 ] Compressed Air Testing Dev…

100%1 / 298
Measuring Equipment and Tools
Calibration Tools for Vision Systems
220 Service Manual SIPLACE SX4/DX4
4.3
4.3 Calibration Tools for Vision Systems
Calibration Tools for Vision Systems
4.4
4.4 Calibration Nozzle for TwinHead [03008862-xx]
Calibration Nozzle for TwinHead [03008862-xx]
4.5
4.5 Belt Tension Device [00326015-01]
Belt Tension Device [00326015-01]
Use:
The calibration tool [03010565-xx] is used to calibrate the
C&P6/12 placement heads in the D/X and HF machines.
▪ Another calibration tool is available for the C&P20
head of the X series:
Calibration tool [03034148-01] version for C&P20
head (for the component camera system type 23)
▪ Another calibration tool is available for machines with
4xx software:
Calibration tool [00316308-03] version II transparent
The various calibration tools for the different machine
types are listed here for the sake of completeness.
Use:
The calibration nozzle is used to calibrate the D axis of
the TwinHead or P&P head.
NOTICE!
This nozzle is no longer needed from SW705.03.
Use:
The belt tension measuring device is used to measure
the belt tensions (toothed belt) at the machine.
Measuring Equipment and Tools
Compressed Air Testing Device [00311487-01]
Service Manual SIPLACE SX4/DX4 221
4.6
4.6 Compressed Air Testing Device [00311487-01]
Compressed Air Testing Device [00311487-01]
4.7
4.7 Setting Gauge for Board Clamping [00369202-01]
Setting Gauge for Board Clamping [00369202-01]
Use:
The compressed air tester is used to set the air blast at
the C&P6 and C&P12 placement heads in the SIPLACE
placement machines.
Setting gauge for board clamping [00369202-01]
Measuring Equipment and Tools
Setting Gauge for Actuator [03049740-xx]
222 Service Manual SIPLACE SX4/DX4
4.8
4.8 Setting Gauge for Actuator [03049740-xx]
Setting Gauge for Actuator [03049740-xx]
4.9
4.9 Belt Tensioning Device for Turning Station DLM [03063649-01]
Belt Tensioning Device for Turning Station DLM [03063649-01]
1. Setting gauge
2. Terminal strip
This device is used for setting the tension of the toothed
belt at the turning station.
This part is available from introduction of the turning sta-
tion DLM version 06 [00341780-06].