SIPLACE-SX4-DX4-用户手册.pdf - 第220页

Measuring Equipmen t and Tools Calibration Tools for Vision Systems 220 Service Manual SIPLACE SX4/DX4 4.3 4 . 3 C a lib r a t io n T o o ls f o r V is io n S y s t e m s Calibration Tools for Vision Systems 4.4 4 . 4 C …

100%1 / 298
Measuring Equipment and Tools
Calibration Tool [03010565-xx]
Service Manual SIPLACE SX4/DX4 219
4
4 Measuring Equipment and Tools
Measuring Equipment and Tools
4.1
4.1 Calibration Tool [03010565-xx]
Calibration Tool [03010565-xx]
4.2
4.2 Calibration Tool [03034148-xx]
Calibration Tool [03034148-xx]
Use:
The calibration tool [03010565-xx] is used for calibration
of the DLM, CPP, P&P heads, TwinHead and PCB cam-
era.
Use:
The calibration tool is used for the following placement
heads:
▪ C&P20
▪ C&P20 A
▪ C&P20 M
▪ C&P20 P
▪ CPP (only at X4i S without stationary camera)
Measuring Equipment and Tools
Calibration Tools for Vision Systems
220 Service Manual SIPLACE SX4/DX4
4.3
4.3 Calibration Tools for Vision Systems
Calibration Tools for Vision Systems
4.4
4.4 Calibration Nozzle for TwinHead [03008862-xx]
Calibration Nozzle for TwinHead [03008862-xx]
4.5
4.5 Belt Tension Device [00326015-01]
Belt Tension Device [00326015-01]
Use:
The calibration tool [03010565-xx] is used to calibrate the
C&P6/12 placement heads in the D/X and HF machines.
▪ Another calibration tool is available for the C&P20
head of the X series:
Calibration tool [03034148-01] version for C&P20
head (for the component camera system type 23)
▪ Another calibration tool is available for machines with
4xx software:
Calibration tool [00316308-03] version II transparent
The various calibration tools for the different machine
types are listed here for the sake of completeness.
Use:
The calibration nozzle is used to calibrate the D axis of
the TwinHead or P&P head.
NOTICE!
This nozzle is no longer needed from SW705.03.
Use:
The belt tension measuring device is used to measure
the belt tensions (toothed belt) at the machine.
Measuring Equipment and Tools
Compressed Air Testing Device [00311487-01]
Service Manual SIPLACE SX4/DX4 221
4.6
4.6 Compressed Air Testing Device [00311487-01]
Compressed Air Testing Device [00311487-01]
4.7
4.7 Setting Gauge for Board Clamping [00369202-01]
Setting Gauge for Board Clamping [00369202-01]
Use:
The compressed air tester is used to set the air blast at
the C&P6 and C&P12 placement heads in the SIPLACE
placement machines.
Setting gauge for board clamping [00369202-01]