SM-131-006.pdf - 第10页
Safe-5 Safety Precautions Confirm that no covers are disengaged before the maintenance work for the machine. If the maintenance work is performed with its cover(s) being detached, a serious accident may occur . Be sure t…
Safe-4
Safety Precautions
Notes on Installation, Transfer and Maintenance
z Do not install or transfer the machine on the customer side after shipment.
z Only the maintenance work on items described in this manual should be performed by
the customer. Please read the service manual carefully before maintenance work.
Do not perform any maintenance work on items that are not described in this manual.
Otherwise, not only breakdown of the machine but also personal injury may result.
0506-002
Safe-5
Safety Precautions
Confirm that no covers are disengaged before the maintenance
work for the machine.
If the maintenance work is performed with its cover(s) being
detached, a serious accident may occur.
Be sure to attach them in place.
Make certain that no person or object comes in contact with the
moving mechanisms of the machine. Then, check safety and
power up the machine to start operation.
Do not start the machine unless those working in the immediate
area of the machine are aware of hazards from moving parts.
Do not modify the machine nor use any parts other than the
specified ones. Be sure not to work with its safety devices de-
tached. Doing otherwise may cause personal injury.
Do not change the settings of OS (Operating System) or install
any applications additionally.
DANGER
Precautions before Maintenance
WARNING
When maintenance work is performed with the bank feeder
change cart being connected, note that a clearance can easily
be left at the area where the feeders are installed.
0506-002
Safe-6
Safety Precautions
0506-002
Precautions before Maintenance (continued)
CAUTION
In principle, the overall operation of the machine including the
button operations on the operation panel and the touch screen
must be controlled by only one person.
If there are more than one, ensure good communication by giving loud
verbal instructions.
Even after the [EMERGENCY STOP] switch is pressed, note
that electrical power is supplied to the control device.
To shutdown the power to all loads, set the power breaker to
"OFF".
When an "Emergency Switch Off" function is required, it must
be prepared on the customer side.
Emergency Switch Stop : Emergency Interception of Controlled Load
Power Sources
Emergency Switch Off : Emergency Interception of All Load Power
Sources
Data may become unavailable due to breakdown or mishandling of
the machine.
It is strongly recommended that the hard disk data be periodically
backed up with the network terminal (option).
CAUTION
No person other than the service personnel is allowed to enter the
work area.
Before performing the automatic operation of the machine, check the
following items.
Checking Items:
(1) Confirmation of Power Supply and Air Pressure
("1.1" in "Chapter 2" of "Volume 1: Guide" in the instruction manual)
(2) Confirmation of Cover Section
("1.1" in "Chapter 2" of "Volume 1: Guide" in the instruction manual)
The floppy disk drive in the control box is provided only for
maintenance work. Do not use the drive for any other purposes.