SM-131-006.pdf - 第80页

Device Name Chip Mounter Block Name Page No. Unit Name Revision Model Item GXH-1 Chapter 3 Various Setting 2. Setting of Various Boards 2.7 Setting of UA53 Boards (I/F Boards) • Two UA53 boards are used in the machine. R…

100%1 / 325
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model ItemGXH-1
Chapter 3 Various Setting
2. Setting of Various Boards
2.5 Setting of UB14 Boards (I/O Boards)
• The UB14 boards are used at three places - Power Supply Section, Transfer
Section, and Cutter/Positioning Section.
Refer to "9. Layout of Various Boards" in chapter 13 for where they are arranged.
2.5.1 Setting of Dip Switches
• When the UB14 board is used in
the power supply section, set
SW1 like "A" in Fig. C5.
• When the UB14 board is
used in the transfer section,
set SW1 like "B" in Fig. C5.
• When the UB14 board is
used in the cutter/positioning
section, set SW1 like "C" in
Fig. C5.
2.5.2 Setting of Jumper
With Jumper JP1, short between two pins as shown in Fig. C5.
2.6 Setting of UB13 Boards (I/O Boards)
• The UB13 boards are used at three places - Front Operation Panel, Rear
Operation Panel, and Light Tower.
Refer to "9. Layout of Various Boards" in chapter 13 for where they are arranged.
2.6.1 Setting of Dip Switches
• When the UB13 board is used in
the front operation panel, set
SW1 like "A" in Fig. C6.
• When the UB13 board is used in
the rear operation panel, set SW1
like "C" in Fig. C6.
• When the UB13 board is used in
the light tower, set SW1 like "B"
in Fig. C6.
Fig. C5 UB14
Fig. C6 UB13
0406-001
3-4
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model ItemGXH-1
Chapter 3 Various Setting
2. Setting of Various Boards
2.7 Setting of UA53 Boards (I/F Boards)
• Two UA53 boards are used in the machine.
Refer to "9. Layout of Various Boards" in chapter 13 for where they are arranged.
2.7.1 Setting of Dip Switches
Set Dip Switches SW1, SW2,
and SW3 as shown in Fig. C7.
2.7.2 Setting of Jumpers
Set Jumpers JP1, JP2, JP3, and
JP4 as shown in Fig. C7.
2.8 Setting of UB22 Board (I/O Board)
• The UB22 board is used in the head section.
Refer to "8. Layout of Head Section" in Chapter 13 for where it is arranged.
2.8.1 Setting of Dip Switch
Set Dip Switch SW1 as shown in
Fig. C8.
Fig. C7 UB53
Fig. C8 UB22
0406-001
3-5
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model ItemGXH-1
Chapter 3 Various Setting
2. Setting of Various Boards
2.9 Setting of Multiaxis Driver Boards
• Eight pieces of multiaxis driver boards are used in the head and transfer sections.
Refer to "8. Layout of Head Section", "1.5 Layout of BL Block", and "1.6 Layout of
BR Block" in Chapter 13 for the location.
2.9.1 Setting of Boards
When the multiaxis driver boards are
used in the transfer or the head section,
CS1 and SW1 must be set as shown in
Fig. C9.
2.10 Setting of Motion Control Boards
• The motion control boards are used in the CPU2 box.
Refer to "1.8 Layout of FB Block" in Chapter 13 for the location.
2.10.1 Setting of Dip Switches
Set Dip Switch SW1 of the U82, U83, and U84 boards as shown in Fig. C10.
Fig. C9 Setting of Switch for Multiaxis
Driver Board
Fig. C10 Dip Switches of Motion Control Boards
0406-001
3-6