SM-131-006.pdf - 第208页

Device Name Chip Mounter Block Name Page No. Unit Name Revision Model Item GXH-1 Chapter 11 Recognition Section 2. Replacement of Co mponent Recognition Camera 2.3 Attachment of Component Recognition Camera Unit Attach t…

100%1 / 325
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model ItemGXH-1
Chapter 11 Recognition Section
2. Replacement of Component Recognition Camera
2.2 Attachment of Component Recognition Camera
(1) Attach the component recognition camera. (Camera Assembly)
Positioning pins are used in the frame for camera attachment. Place the camera assembly
along the positioning pins. (Fig. K14)
(2) Connect the connector (camera cable and coaxial lighting).
(3) Attach the four bolts (M5L20) and tighten the two bolts (M5L45) to attach the lighting
section for the component recognition camera. (Fig. K12)
(4) Execution of Teaching Operation on Component Recognition Camera Offset
Perform the "Magnification Teaching" and "Offset Teaching" operations in "Offsets of
Component Recognition Camera".
0406-001
11-6
Fig. K14 Camera Positioning
Positioning Pins
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model ItemGXH-1
Chapter 11 Recognition Section
2. Replacement of Component Recognition Camera
2.3 Attachment of Component Recognition Camera Unit
Attach the component recognition camera unit (Fig. K15) along the positioning pins on the
main body with four bolts (M8L30 SW, FW). (Figs. K16 and K17)
M8L30
M8L30
Fig. K15 Component Recognition Camera Unit
Front Side of Machine
Jig Holder
Ring Lighting
Coaxial Lighting
Direction of Camera Installation
(Name Plate Attachment Side)
Fig. K16 Direction of Component Recognition Camera Unit Attachment
Direction of Camera Installation
(Name Plate Attachment Side)
Direction of Camera Installation
(Name Plate Attachment Side)
Direction of Camera Installation
(Name Plate Attachment Side)
0406-001
11-7
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model ItemGXH-1
Chapter 11 Recognition Section
2. Replacement of Component Recognition Camera
Fig. K17 Position of Component Recognition Camera Unit Attachment
Nozzle Stocker Positions
Component Recognition
Camera Positions
Pushing
Pushing
Pushing
Pushing
Component Recognition
Camera Positions
0406-001
11-8