SM-131-006.pdf - 第84页

Chapter 4 Beam Section This chapter describes how to change and adjust the beam section. • Replacement of X-Axis Motor Stator and Rotor • Replacement of Y-Axis Motor Stator and Rotor • Replacement of Servoamplifier • Rep…

100%1 / 325
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Various Adjustments
Revision
Model ItemGXH-1
Specified Tensions of Various Belts Table C3
Setting of Tension Meter
Specified
Tensions
Width
Unit
Weight
Span
Unit Name Belt Name
Unit mm ｇf/cm mm
28 to 32 N
Head Section
Nozzle Selection Axis
Motor Belt
2.9 to 3.3 kgf
92.540
59 to 69 N
Backup Table
Section
Table Up/Down Axis
Timing Belt
6 to 7 kgf
12 0.25 250
15.8 to 20.8 N
Motor Belt for NL/NR
Transfer
1.6 to 2.1 kgf
90.1359
74 to 84 N
NL/NR Width
Adjusting Belt
7.5 to 8.5 kgf
15 0.25 77
4.3 to 5.3 N
NL
Section
Belt for NL/NR Transfer
0.44 to 0.54 kgf
2 0.13 165
15.8 to 20.8 N
Motor Belt for NL/NR
Transfer
1.6 to 2.1 kgf
90.1359
74 to 84 N
NL/NR Width
Adjusting Belt
7.5 to 8.5 kgf
15 0.25 77
4.3 to 5.3 N
NR
Section
Belt for NL/NR Transfer
0.44 to 0.54 kgf
2 0.13 165
15.8 to 20.8 N
Motor Belt for NA Transfer
1.6 to 2.1 kgf
90.1346
4.3 to 5.3 N
NA
Section
Belt for NA transfer
0.44 to 0.54 kgf
20.1367
15.8 to 20.8 N
Motor Belt for NB Transfer
1.6 to 2.1 kgf
90.1346
4.3 to 5.3 N
NB
Section
Belt for NB Transfer
0.44 to 0.54 kgf
20.1367
15.8 to 20.8 N
Motor Belt for NC Transfer
1.6 to 2.1 kgf
90.1346
4.3 to 5.3 N
NC
Section
Belt for NC Transfer
0.44 to 0.54 kgf
20.1367
44 to 54 N
Transfer Section
Width Chute Width Adjusting Belt
4.5 to 5.5 kgf
9 0.25 510
44 to 54 N
Cutter Transfer Belt
4.5 to 5.5 kgf
9 0.25 675
44 to 54 N
Cutter
Section
Cutter Motor Belt
4.5 to 5.5 kgf
9 0.25 87.8
0406-001
Chapter 3 Various Setting
3. Specified Tensions of Various Belts
3-8
Chapter 4
Beam Section
This chapter describes how to change and adjust the beam
section.
• Replacement of X-Axis Motor Stator and Rotor
• Replacement of Y-Axis Motor Stator and Rotor
• Replacement of Servoamplifier
• Replacement and Adjustment of X-Axis Encoder
• Replacement and Adjustment of Y-Axis Encoder
• Replacement of Linear Scale
0406-001 4-A
0406-001 4-B