SM-131-006.pdf - 第201页
0406-001 1 1-B
Chapter 11
Recognition Section
This chapter describes how to replace the recognition
section.
• Replacement of PEC Recognition Camera
• Replacement of Component Recognition Camera
0406-001 11-A
0406-001 11-B
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model ItemGXH-1
Chapter 11 Recognition Section
1. Replacement of PEC Recognition Camera
1.1 Directions of PEC Recognition Cameras
(Cameras and Lighting Units) for Detachment
Top View
1.2 Detachment of PEC Recognition Camera Unit
(1) Detach the head cover. (Upper Area on Front Side)
(2) Cut the tie wraps of the camera and lighting cables. (Several Places)
(3) Disconnect the camera cable from the camera.
(4) Disconnect the nylon connector (6 pins) for the
lighting cable.
Detach the multiaxis board to expose the nylon
connector (X13901) located under the multiaxis
board for the head upper section on the main
machine side and disconnect the connector.
When the connector cannot be found after the
detachment of the multiaxis board, try to detach
the UB25 board located under the multiaxis
board.
0406-001
11-1
Setbolt for Camera Attachment
M4 L15 3 places
Lighting Cable
1
3
2 4
Label
Fig. K1 Directions of PEC Recognition Cameras
Camera
Camera
Camera
Camera
Fig. K2 Head Unit
(2)
(3)
Fig. K3 Head Control Board