SIPLACE Station Software 7xx to 714 介绍.pdf - 第211页
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition 211 10.20 Reading Individual Bar code Fiducials with Board Camera – Enhancements Co mpatible mode: Not compatible Until now, reading the individ…
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition
210
10.17 Changing Lower Activity Level to SIPLACE Service
Compatible mode: Complete
For any activity on an activity level lower than SIPLACE service the activity level can now be
changed to SIPLACE service. To do this modification or changing back to a lower activity level,
the SIPLACE service activity level is required.
In the dialog for changing the activity level, SIPLACE service is always offered. This dialog is
displayed for all functionalities for which the default activity level is not SIPLACE service.
10.18 Different Activity Levels for Handling Segment States
Compatible mode: Complete
Three buttons are now offered for handling segment states in the Manual operation view: Enable,
Disable and Do not use. The accessibility of the buttons changes according to the selected
segment.
Disable is available from the Advanced production activity level. Do not use is available from the
Basic production activity level.
10.19 Improved Board Identification
Compatible mode: Complete
The process for identifying a board when loading it into the placement machine has been improved
and now offers a more reliable barcode reading in the input section of the conveyor.
The X/Y barcode position on the board and the location on the current or opposite board side can
be defined in SIPLACE Pro. This information is sent to the station. The conveyor software
calculates the correct moment to trigger the correct barcode reader and proposes the correct
trigger setting automatically.
The operator can select if the proposed barcode reader setting shall be used. It is also possible to
add a constant offset / time to individually adjust the trigger of barcode reading. This parameter will
be preset automatically and refers to the time it takes to move the board to the input section of the
machine. The parameter is editable on the station software GUI under Service – Conveyor
configuration – Lane x – Parameters.
It is possible to combine an external barcode reader with the board camera for reading the
barcode.
The maximum number of characters for the barcode has been increased to 255.
Restrictions
Barcode fiducials and barcode-controlled production cannot be combined.
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition
211
10.20 Reading Individual Barcode Fiducials with Board Camera –
Enhancements
Compatible mode: Not compatible
Until now, reading the individual barcode fiducials with the board camera was only possible for
components in a tape feeder. From this station software version, the option can be used
independently of the packaging unit (tape, tray, …).
– If a component has a barcode positioned out of the focus height of the board camera and the
barcode cannot be recognized with good quality, the option must be disabled for this
component.
– If reading the barcode fails, the component remains in the tray and will not be picked up.
NOTICE
If this feature is used, there are areas at the tray that the board camera cannot approach.
10.21 Nozzle Magazine with 20 Garages for CPP Placement Head
Compatible mode: Not supported
This station software version supports the new nozzle magazine with 20 garages (nozzle type
20xx) for CPP placement heads. The magazine types 12*20xx, 20*20xx and 9*28xx may be mixed
in one nozzle changer.
Custom nozzles with a length > 16 mm can only be placed in the garages 3, 4 and 5. For standard
nozzles there are no restrictions.
10.22 Long Board Option up to 1500 mm
The licensed Long Board Option (LBO) is now supported for boards up to 1500 mm. The relevant
settings must be enabled in SIPLACE Pro.
Detailed information can be found in the LBO User Manual, item no.: [00197085-xx].
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition
212
10.23 Miscellaneous Improvements and Adaptions
Compatible mode: Complete
10.23.1 AutoLogOff functionality
– At the AutoLogOff time, the open dialog is automatically closed because access to the dialog is
no longer allowed. When closing a dialog, a Cancel action is automatically executed, changes
will not be saved.
– An independent timeout value has been introduced for the SIPLACE service AutoLogOff.
10.23.2 Message Bar
Detailed errors and errors are now displayed in a single message bar. The rules for determining the
top message in the stack remain, i.e.:
– Detailed errors have a higher stack level than errors.
– Detailed errors are sorted following the rule: "the sooner, the higher the stack level".
– Errors are sorted following the rule: "the sooner, the lower the stack level".
– Within the errors, the stack order is affected by the priority defined in the user message: "the
higher priority, the higher the stack level".
All messages are also displayed in a combo box. However, the errors do not offer direct navigation
to SIPLACE Vision dumps or online help, they can only be selected.
10.23.3 Table Symbol in Production View
In the Production view is displayed how the boards are moved in the machine. The tables are also
schematically displayed in this view. Up til now they could have two states: idle (green) and alarm
(red).
The tables are also displayed in the Setup view, but there they can have three states: idle (green),
warning (orange) and alarm (red as in the Production view).
For more consistency, the tables in the Production view now also have the warning state (orange).
10.23.4 Faster Calibration and Head Mapping
The segment offset calibration and head mapping have been speeded up by using the Z-height of
the calibration tool and calibration tool pocket.
10.23.5 Enabling Pin1 Detection
The Pin1 detection option does not have to be enabled in the station software anymore but in
SIPLACE Pro. Please refer to the SIPLACE Pro 13.1 Software Version Description, item no.:
[00198005-xx].