SIPLACE Station Software 7xx to 714 介绍.pdf - 第27页
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition 27 Features for SX -Serie s (V703.01) The station software supp orts the new SX1/S X2 placement machine (with one or two gantries). 4.11 Nozzle …
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition
26
SIPLACE Interface
(variant)
✓
✓
✓
✓
The option is displayed in the
configuration GUI. Together with Quad
Lane only SMEMA interface is
possible.
Manual tray
✓
WPC5
✓
See section 4.15
Splice detection X-
feeder
✓
✓
Changeover table for X-
feeder
✓
✓
✓
✓
Component level
indicator
✓
✓
"IPTE Multi Stick
Feeder"
✓
✓
8x88 mm X-feeder
✓
8-16
mm
8-16 mm
✓
2x8 mm X-feeder
✓
✓
✓
✓
Reject conveyor with X-
adapter
✓
✓
✓
✓
Label feeder with X-
adapter
✓
✓
✓
✓
Stick feeder with X-
adapter
✓
✓
✓
✓
Dip module for X-tables
(LDU_X)
✓
✓
✓
✓
Vacuum pump option
✓
✓
for C&P20A placement heads
Mapping plate
✓
✓
✓
✓
See section 4.20
ACT
✓
✓
✓
✓
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition
27
Features for SX-Series (V703.01)
The station software supports the new SX1/SX2 placement machine (with one or two gantries).
4.11 Nozzle Changer Configuration (TwinHead, C&P20A, CPP)
Depending on the built-in hardware devices and their positions (e.g. placement head type,
stationary cameras, table position outside/inside), different nozzle changer configurations are
possible on the SX1/SX2 placement machines. The mechanically available magazine carrier
locations, the nozzle reject bin and centering station, and the available reject boxes for components
and nozzles are parts of the nozzle changer configuration. Four magazines per magazine carrier
and up to four magazine carriers per gantry are available.
4.11.1 Magazine Carrier Numbering
The magazine carrier numbering on the SX1/SX2 placement machine is defined as follows:
3 4
1 2
Conveyor
2 1
4 3
Figure 4-1: Magazine carrier numbering on the SX1/SX2 placement machine
The figure displays the maximal number of magazine carriers and their numbering on the SX1/SX2
placement machine. Depending on the built-in hardware, all magazine carriers are not always
available. In principle, the available magazine carrier locations differ, if the table is installed inside
or outside and if a WPC or stationary cameras are available.
Only the magazine carrier locations that are mechanically available are displayed on the GUI. The
following example displays the available magazine carrier locations, if the table is located outside.
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition
28
The figure above displays that four magazine carrier locations are mechanically available for this
machine configuration. Magazine carriers are installed on the magazine carrier locations 1 and 2
(blue border). The magazine carrier locations 3 and 4 (red border) are empty. The orange border
displays the nozzle reject bin.
The station software checks if the magazines are correctly installed and are valid for the installed
placement head. Otherwise, the corresponding magazine is displayed on the GUI.
4.11.2 Reject Bins
The disposal of components is a firm part of the placement cycle. Different reject bins are available,
depending on component range, placement head and machine type. For each reject procedure the
suitable bin is found and accessed.
Always the smallest possible bin for the component is selected and only as a last possibility, the
nozzle reject bin is used. If several bins or the component reject channel are considered, the travel
distance is minimized.
For each gantry on the SX1/SX2 placement machine there are five positions for component reject
bins and nozzle reject bins, four positions for the components and one position for the nozzles.
Maximal four reject bins can be installed at the same time (three for components and one for
nozzles). The station software checks if the reject bins are available and correctly installed.
Otherwise, the missing/incorrectly installed reject bin is diplayed on the GUI.
4.12 Gripper for TwinHead
The station software supports the gripper (non-standard nozzle) for TwinHead on the SX1/SX2
placement machine.