SIPLACE Station Software 7xx to 714 介绍.pdf - 第3页
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition 3 Contents 1 SIPLACE Station Software – Fea ture Description 13 2 Feature Description – Statio n Software V701.x 15 3 Feature Description – Stat…
All names identified by ® are registered trademarks of the ASM Assembly Systems GmbH & Co. KG. The
remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes
could violate the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information given in this publication is reviewed regularly and any necessary corrections are included in
subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG Item-no.: 00197741-12
Rupert-Mayer-Strasse 44
81379 München
Germany
www.asm-smt.com
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition
3
Contents
1 SIPLACE Station Software – Feature Description 13
2 Feature Description – Station Software V701.x 15
3 Feature Description – Station Software V702.x 17
3.1 New Placement Head SIPLACE CPP................................................................ 17
3.2 Support of Twin Head/HFH ................................................................................ 17
3.3 Configurable Nozzle Scan ................................................................................. 17
3.4 Extended Support of X-Feeders ........................................................................ 17
3.5 Tray Feeding ...................................................................................................... 18
3.6 New Conveyor Mode "Quad Lane" .................................................................... 18
3.7 Single Conveyor Mode on X4i ........................................................................... 19
3.8 New Dip Module LDU_X for X-Tables ............................................................... 20
3.9 Accuracy Check Tool (ACT) .............................................................................. 20
3.10 Fast Head Exchange ......................................................................................... 20
3.11 "Virtual PCB Stack" ............................................................................................ 21
3.12 Extension of the Form Editor (SIPLACE Vision) ................................................ 21
3.13 Auto Configuration ............................................................................................. 21
3.14 Reduced Air Consumption with Vacuum Pump ................................................. 21
3.15 Screen Saver ..................................................................................................... 21
3.16 Feeder Setting Comparison ............................................................................... 22
4 Feature Description – Station Software V703.x 23
4.1 X4i with New Electronic Concept ....................................................................... 23
4.2 SX1/SX2 placement machine ............................................................................ 23
4.3 C&P20 Placement Head .................................................................................... 23
4.4 Fast Head Exchange – Separating Component Camera from Head ................. 23
4.5 2x8mm X-Feeder ............................................................................................... 23
4.6 "IPTE Multi Stick Feeder" ................................................................................... 23
4.7 Long Board Option ............................................................................................. 24
4.8 Automatic Change to Manual Mode during Calibration ..................................... 24
4.9 Extension of SIPLACE Vision ............................................................................ 24
4.10 Supported Hardware Options with an Interface to Station Software 703 ........... 25
4.11 Nozzle Changer Configuration (TwinHead, C&P20A, CPP) .............................. 27
4.11.1 Magazine Carrier Numbering ............................................................................. 27
4.11.2 Reject Bins ......................................................................................................... 28
4.12 Gripper for TwinHead......................................................................................... 28
4.13 New PCB conveyor system ............................................................................... 29
4.13.1 Transport Modes ................................................................................................ 29
4.13.2 Fixed Rail Position in Single Conveyor Mode .................................................... 29
4.13.3 Calibration Data for Conveyor Control ............................................................... 29
4.13.4 Thick Board Option ............................................................................................ 29
4.13.5 Heavy Board Option .......................................................................................... 29
4.13.6 Rotational Angle Compensation for Short, Wide Boards ................................... 30
4.13.7 Display of Conveyor Input/Output States on the GUI ........................................ 30
4.13.8 Boards on Sensor in Input Conveyor ................................................................. 30
4.14 Changeover Tables 60 and 30 .......................................................................... 30
4.14.1 New Location Type WPC + Changeover Table 30 ............................................ 30
4.14.2 New Button on the GUI for Inserting/Removing Table ....................................... 30
4.15 WPC5 Support ................................................................................................... 31
4.15.1 Endurance Runs for Axes .................................................................................. 31
4
4.16 Parking Position for Gantries during Maintenance ............................................. 31
4.17 H-Gantry Calibration (Y-Axis) / Encoder Alignment ........................................... 31
4.18 X-Axis Calibration (Axis Parametrization) .......................................................... 32
4.19 Component Counter State ................................................................................. 32
4.20 New Mapping Plate ............................................................................................ 32
4.21 Dip Module LDU_X ............................................................................................ 32
4.22 Fiducials for Stationary Cameras ....................................................................... 32
4.23 Auto Configuration ............................................................................................. 33
4.24 Reduced Air Consumption with Vacuum Pump ................................................. 33
4.25 Station-Wise Download (Job Change) ............................................................... 33
4.26 Maintenance Due Status for CPP Placement Head and SX Main Axes ............ 33
4.27 Non-Standard Nozzles Can Be Rejected ........................................................... 34
4.28 Settings for Manual Tray Carrier SX .................................................................. 34
4.29 Two-Row Nozzle Changer on SX1/SX2 for C&P20 and CPP ........................... 34
5 Feature Description – Station Software V704.x 35
5.1 Support of SX+ Placement Machine .................................................................. 35
5.2 Support of New Feeders .................................................................................... 35
5.3 Fast Gantry Exchange on SX Placement Machines .......................................... 35
5.4 WPC6 with Non Stop Module ............................................................................ 35
5.5 Long Board Option ............................................................................................. 36
5.6 Automatic Exchange of Defective Nozzles ........................................................ 36
5.7 Automatic Recognition of Feeder Pitch.............................................................. 38
5.8 Improved Operator Guidance ............................................................................ 38
5.9 Automatic Product Changeover (Barcode Controlled Production) ..................... 38
5.10 Controlled Board Transfer between Placement Machines ................................. 39
5.11 Support of SX4 Placement Machine .................................................................. 40
5.12 Service Positions for Placement Heads ............................................................. 40
5.13 Support of SX4 Conveyor Type ......................................................................... 40
5.13.1 Flexible Section Model in the Conveyor Interface .............................................. 41
5.13.2 Stop Positions for Fixed Conveyor Rail – Conveyor Configurations .................. 41
5.14 LDU_X Module – Multiple Squeegee Cycles, Warnings .................................... 41
5.15 Component Counter – Redundant Storage ....................................................... 42
5.16 Enhanced Endurance Run Functionality for Test Purposes .............................. 42
5.17 Improved Z-Teaching during Pick-Up – Detection of Empty Divisions .............. 42
5.18 Detection of Component Missing at Nozzle ....................................................... 42
5.19 Setting Build Time on the GUI ........................................................................... 43
5.20 Enhanced SIPLACE Vision Functionality ........................................................... 43
5.21 Settings for Manual Tray Carrier SX .................................................................. 43
5.22 Two-Row Nozzle Changer on SX1/SX2 for C&P20 and CPP ........................... 44
5.23 Flexible Usage of Feeder Types ........................................................................ 44
5.24 SST38 PCB Camera Replaced by SST30 ......................................................... 44
5.25 Improved Traveling Range Measurement .......................................................... 44
6 Feature Description – Station Software V705.x 45
6.1 DX-Series Placement Machines ........................................................................ 45
6.2 PCB Barcode Recognition with PCB Camera .................................................... 45
6.3 Coplanarity Module with 3D Coplanarity Sensor ............................................... 46
6.3.1 Coplanarity Measurement with the 3D Coplanarity Sensor ............................... 46
6.4 Support of Long Boards on SX4 ........................................................................ 47
6.4.1 Additional Stopper for 380 mm Long Boards ..................................................... 47
6.5 Alternative Components .................................................................................... 47
6.6 LED Placement .................................................................................................. 48
6.6.1 Changeover Support for LED Feeders .............................................................. 48
6.6.2 LED Machine Configuration ............................................................................... 48
6.7 Teaching of Placement Positions during Placement .......................................... 48
6.8 Brightness Calibration of Digital Camera Systems ............................................ 49
6.9 No Machine Stop at "Track Empty" Errors in I-Placement Mode ....................... 50
6.10 SIPLACE Smart GUI .......................................................................................... 50
6.11 Automatic Storage of Feeder Parameters ......................................................... 53
6.12 New Feeder Types ............................................................................................ 53