SIPLACE Station Software 7xx to 714 介绍.pdf - 第54页
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition 54 6.14 SIPLACE Random Setup Feature for Trays The station software offers the SIPLACE Random Setup feature f or a flexible setup of t ray feede…
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition
53
3) / 4) Possible workflows and workflow directives
Here the possible troubleshooting workflows are displayed as buttons. For some workflows up to
four troubleshooting possibilities are displayed. By pressing a button, a corresponding
troubleshooting assistance is displayed to the right. It is automatically switched between the single
steps in the assistance. Some workflows change if Setup Center is present or not.
5) Confirmation
By pressing the green arrow symbol the operator confirms that troubleshooting has been
performed and production can continue. If necessary, further dialogs appear (e.g. prompting to
press the Start key on the machine, close the cover etc.).
6) Switch to station software GUI
With this button it is possible to switch to the regular station software GUI.
6.11 Automatic Storage of Feeder Parameters
If the option for automatic synchronization is activated, all changes to the feeder parameters (pitch,
speed or pick-up position) are automatically sent to SIPLACE Pro in order to store them in the local
setup. A corresponding icon appears in the Feeder details view. If the option is deactivated, no
values are sent to SIPLACE Pro and it is not possible to send the values manually from the station
to SIPLACE Pro either. However, in case that the values do not correspond to the set values in
SIPLACE Pro, the values in SIPLACE Pro can be transferred manually.
6.12 New Feeder Types
The following new feeder types are supported by this station software version:
4mm X-feeder, 16mm XN-feeder, 104mm X-feeder and Surftape AX.
The Surftape AX feeder is designed for the chips (bare dies) placement in the machine and is
supported for the 8mm, 12mm and 16mm widths. This feeder is a 3rd-party feeder and is not
delivered by ASM Assembly Systems GmbH & Co. KG. It is placed on the X-table via the X-feeder
adapter and is mounted on the adapter via a separate adapter plate.
6.13 Station-Wise Download with WDTL
As of this station software version, the “Whispering down the Line” (WDTL) function is supported
for station-wise download, i.e. the last board of the previous recipe only has to be confirmed at the
first station. Additionally, in synchronous dual conveyor lane mode a batch change at the first
station only has to be confirmed at the conveyor lane on which the board type changes.
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition
54
6.14 SIPLACE Random Setup Feature for Trays
The station software offers the SIPLACE Random Setup feature for a flexible setup of tray feeders.
The most important feature is the random setup for trays. For this, the trays have to be marked as
random in SIPLACE Pro and the system has to be run together with SIPLACE Setup Center.
The following use cases are possible:
– A tray that is described in the target setup can be set up on another level. Thereby, another
random target specification may be suppressed. Target setup means the setup that is specified
in SIPLACE Pro and is sent to the station.
– A tray that is described in the target setup can be set up several times, i.e. additional trays may
be added.
The feature can be used for WPC5, WPC6 und MTC.
At the station random feeders / trays are marked with a double arrow ( ) in the Feeders,
components and nozzles view.
Restrictions
The feature only works in combination with SIPLACE Setup Center.
6.15 Pneumatic Stopper for SX-Series
As of this station software version all SX-series conveyors are equipped with pneumatic stoppers
instead of the former standard mechanical stoppers. The conveyors recognize different
configurations and so they can be operated with different stopper configurations.
6.16 Zero Point Calibration for Twin /DP Axes
Until now the zero correction for Twin / dp axes was determined with the aid of a special calibration
nozzle.
As of this station software version the empty nozzle interface of the segment (i.e. without nozzle) is
measured via SIPLACE Vision for calibration instead. The operator only has to remove the existing
nozzle from the segment before. Additionally, the calibration is not performed segment-wise but
head-wise.
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition
55
6.17 Settings for Manual Tray Carrier SX
If the manual tray Carrier SX is used, the insert frame with the fold-away tape guide channel is
required. For this, the operator has to make manual settings in the Auto-configuration under
Machine configuration on the Machine service activity level.
Figure 6-5: Settings for manual tray Carrier SX
The 60 slots (outer position, fold-away tape duct) entry has to be set for the table location.
Thus, the 27x27 reject bin and the left reject channel on the location are excluded from the
configuration.
CAUTION
If this setting is not made the component may be rejected over the tray and the Z-axis
may dash hard against the tray.
On upgrading from station software versions <=704 the settings in the Auto-configuration
have to be checked accordingly, if the manual tray Carrier SX is used.
6.18 Adjustable Minimum Track Width
Special mechanical factors of the conveyor (e.g. wider mechanical stoppers in customized
solutions) may cause restrictions for the conveyor width. The serial minimum conveyor track width
cannot be adjusted anymore. To prevent this, the minimum conveyor track width can be adjusted
for the SX-series and DX-series placement machines. Under Conveyor configuration the
operator can adjust the new Minimum track width parameter on the Machine service activity
level as follows.