00197395-03_AI_3D_Sensor-Koplan_X-Serie_S_DE_EN.pdf - 第113页
3 Installation 3.8 Connecting the Cable to 3D Coplanarity Module Assembly Instructions / Montageanleitung SIPLACE X-Series S 3D-Sensor 06/2020 113 3.8 Connecting the Cable to 3D Coplanarity Module ► From the 3D Coplan mo…
3 Installation
3.7 Connecting the Cable to the (M)GCU
112 Assembly Instructions / Montageanleitung SIPLACE X-Series S 3D-Sensor 06/2020
Fig.33: Overview of MGCUs on X4 S and X4i S
3 Installation
3.8 Connecting the Cable to 3D Coplanarity Module
Assembly Instructions / Montageanleitung SIPLACE X-Series S 3D-Sensor 06/2020 113
3.8 Connecting the Cable to 3D Coplanarity Module
► From the 3D Coplan module, pull the camera link cable through the machine frame to the in-
stallation location of the coplanarity computer at location1.
NOTICE
Maintenance
Run the cable over the power supply plate, so that this can be removed for maintenance
purposes.
Fig.34: Adapter
► Go to the COT insert and look for the
cable [03076491-xx](2)
marked x122.
► Unplug the connectors from the COT
insert(1)
and(3) and fit the adapter (2)
between the connectors.
Fig.35: Connecting the cables
► Run the orange cable from one open-
ing to the other and connect it to the 3D
coplanarity module(1).
► Connect the "Axis signals 3D sensor"
cable to the RS422 connector(2)
.
► At this stage, continue to install the sta-
tionary IC camera.
► Fit the used tape chute at location2.
See also
2 3.2 "Preparing the Installation of the IC Camera (Type 33)" [}99]
2 4.1.1 "Replacing the waste tape slide" [}137]
3 Installation
3.9 Installing the LAN card in the station computer (from Hxxxx)
114 Assembly Instructions / Montageanleitung SIPLACE X-Series S 3D-Sensor 06/2020
3.9 Installing the LAN card in the station computer (from Hxxxx)
If a 3D Coplan or a barcode scanner is installed, the "LAN card PCI Express 2x Gigabit
LAN" [03118416-xx] is needed in addition.
This LAN card is fitted in the "BoxPC 427D" [03114177‑xx] from serial no. Hxxxx. Older machines
do not require this LAN card.
Overview
Fig.36: Station computer (BoxPC 427D)
1. Free slot for the LAN card
Installation
► Open the covers above the plug-in cards.
► Insert the LAN card into the free slot. Make sure that it fits correctly.
► Refit the cover.