00197395-03_AI_3D_Sensor-Koplan_X-Serie_S_DE_EN.pdf - 第116页
3 Installation 3.11 Installing the station computer (up to Gxxxx) 116 Assembly Instructions / Montageanleitung SIPLACE X-Series S 3D-Sensor 06/2020 3.11 Installing the station computer (up to Gxxxx) Fig.39: Moving the c…
3 Installation
3.10 Fitting the station computer (from Hxxxx)
Assembly Instructions / Montageanleitung SIPLACE X-Series S 3D-Sensor 06/2020 115
3.10 Fitting the station computer (from Hxxxx)
Fig.37: BoxPC
► Reinsert the BoxPC(1) and fix it into
place.
Connecting the cables to the station computer
► Reestablish all connections to the BoxPC.
NOTICE
Monitor
Do not plug in the monitor cable yet.
► Connect the LAN cable from the coplanarity computer with the connection X4 (X4P1) for the
"LAN card PCI-Express 2x Gigabit-LAN" [03118416‑xx].
Overview of connections for BoxPC 427D
Fig.38: BoxPC 427D connections
3 Installation
3.11 Installing the station computer (up to Gxxxx)
116 Assembly Instructions / Montageanleitung SIPLACE X-Series S 3D-Sensor 06/2020
3.11 Installing the station computer (up to Gxxxx)
Fig.39: Moving the cable
► Push the cable upwards and down-
wards, so that there is enough room for
the BoxPC.
Fig.40: Inserting the station computer
► Position the station computer back on
the Velcro fixtures on the frame (1)
.
Overview of connections
Fig.41: Connections BoxPC ABP402-A CPU1020E 2xPCI SSD (iBase)
3 Installation
3.11 Installing the station computer (up to Gxxxx)
Assembly Instructions / Montageanleitung SIPLACE X-Series S 3D-Sensor 06/2020 117
Fig.42: Connections for BoxPC 627x/827x
Connecting the cables to the station computer
Fig.43: Connections on the station computer
► Connect the cable [03076862-xx] to the
USB connection at the bottom right
(10)
.
► Connect the cable [03076864-xx] to the
connection on the right, above the USB
cable (9)
.
► Connect the touchscreen cable
[03076865-xx] on the left, next to the
cable [03076864-xx] (2)
.
► Plug in the touchscreen cable
[030766866-xx] on the left, next to the
USB cable (1)
.
► Plug in the BoxPC voltage supply (4).
► Plug in the CAN bus cable x6pn on the left, to the CAN bus card connection CAN1 (5).
► Connect the CAN bus cable x7pn to the CAN2 (7).
► Plug in the Vision cables (6).
► Plug the newly fitted LAN cable into the right port (8).
► Plug the SIPLACE Pro LAN cable into the left port (3).
NOTICE
Monitor
Do not plug in the monitor cable yet.