00197395-03_AI_3D_Sensor-Koplan_X-Serie_S_DE_EN.pdf - 第81页
81 Assembly Instructions / Montageanleitung SIPLACE X-Series S 3D-Sensor 06/2020 Contents: Contents: 1 Introduction .. 83 1.1 Safety instructions .. 83 1.1.1 Conventions for the use of safety instructions and symbols…
4 Anhang
4.4 Stromlaufpläne
80 Assembly Instructions / Montageanleitung SIPLACE X-Series S 3D-Sensor 06/2020
Abb.122: 3D-Koplan
81Assembly Instructions / Montageanleitung SIPLACE X-Series S 3D-Sensor 06/2020
Contents:
Contents:
1 Introduction.. 83
1.1 Safety instructions.. 83
1.1.1 Conventions for the use of safety instructions and symbols.. 83
1.1.2 Safety instructions for the power supply (without SMPS).. 84
1.1.3 Safety instructions for the power supply (with SMPS).. 85
1.1.4 Safety instructions for work on the cutting device.. 86
1.1.5 Safety instructions for the gantry.. 87
1.1.6 Safety instructions on hazardous materials.. 87
1.1.7 Classification of the optical systems.. 87
1.1.7.1 Classification of the whole machine.. 87
1.1.7.2 Laser classification.. 87
1.1.7.3 Classification of the camera systems.. 87
1.1.8 Safety instructions for the sensor of the coplanarity module.. 88
1.2 Preparatory work..... 89
1.3 Other instructions.. 91
1.3.1 Environmentally-friendly disposal of materials and components.. 91
1.3.2 Use of original accessories and spare parts.. 91
1.3.3 ESD guidelines.. 91
1.3.3.1 What does ESD mean?.. 91
1.3.3.2 Important measures to protect against static charging.. 92
1.3.3.3 Handling ESD modules.. 92
1.3.3.4 Measurements and modifications to ESD modules.. 92
1.3.3.5 Dispatching ESD modules.. 92
1.3.4 Release History.. 93
1.4 Staff qualifications and training.. 93
2 Brief Description.. 95
2.1 Overview of Functions.. 95
2.2 Requirements/Restrictions.. 96
2.3 Scope of Delivery.. 97
2.3.1 Overview of Parts.. 98
2.4 Tools and Equipment Required.. 98
2.5 Required Working Time.. 98
3 Installation.. 99
3.1 Preparing the Workplace.. 99
3.2 Preparing the Installation of the IC Camera (Type 33).. 99
3.3 Fastening the 3D Coplanarity Module.. 101
3.4 Sticking the Laser Warning Labels Into Place.. 102
3.5 Removing the Station Computer.. 103
3.6 Running the cable for the coplanarity computer.. 103
3.7 Connecting the Cable to the (M)GCU.. 106
3.7.1 Overview of GCUs.. 108
3.7.2 Overview of MGCUs.. 110
3.8 Connecting the Cable to 3D Coplanarity Module.. 113
3.9 Installing the LAN card in the station computer (from Hxxxx).. 114
82 Assembly Instructions / Montageanleitung SIPLACE X-Series S 3D-Sensor 06/2020
Contents:
3.10 Fitting the station computer (from Hxxxx).. 115
3.11 Installing the station computer (up to Gxxxx).. 116
3.12 Installing the Coplanarity Computer.. 118
3.12.1 Preparing the Coplan Computer.. 118
3.12.2 Fixing the Coplan Computer and Routing the Cables.. 120
3.13 Completing the Mechanical Work.. 122
3.14 Installing station software 7xx on the coplanarity computer.. 123
3.15 Reconnecting the Station Computer.. 125
3.16 Configuring the LAN card in the station computer (from Hxxxx).. 125
3.17 Commissioning with SW 70x.. 126
3.17.1 Adapting the Configuration.. 126
3.17.2 Calibrating the Stationary Camera SST33.. 127
3.17.3 Calibrating the 3D Coplanarity Module.. 130
3.17.4 Performing the MFU.. 133
4 Appendix.. 137
4.1 Excerpts from the Service Manual.. 137
4.1.1 Replacing the waste tape slide.. 137
4.1.2 Vision LED driver VLT 33.. 138
4.1.3 Vision LED Controller VLC25/33 GigE DTC.. 139
4.2 Excerpt from the assembly instructions "SIPLACE X-Series S, SX-Series V3 station-
ary camera type 25/33 (GigE)" [00197710‑xx]..
140
4.2.1 Fitting the Camera.. 140
4.2.1.1 Adjusting the Camera Jumper Setting.. 141
4.2.1.2 Fitting the IC Camera Type 33.. 141
4.3 Excerpt from the assembly instructions "SIPLACE X-Series S - stationary camera
type 25/33" [00197397‑xx]..
146
4.3.1 Fitting the Camera.. 146
4.3.1.1 Adjusting the Camera Jumper Setting.. 147
4.3.1.2 Fitting the IC Camera Type 33.. 148
4.4 Circuit Diagrams.. 153
4.4.1 Circuit diagrams (up to Gxxxx).. 153
4.4.2 Circuit diagrams (from Hxxxx).. 155