CP7 Series Level3 Tutorial Manual.pdf - 第150页

9.1.8.5 Machine Data Format The format at a cam speed of 80% is detailed below. Head A X MC0A1POX -10.000 ↑↑ ↑ ↑ Head Axes CCIMF name Machine data CCIMF names for other nozzles display as shown below. MCO [A – P] [1 – 6]…

100%1 / 158
9.1.8 Updating the Machine Data
Press [Maintenance] - [PAM Measure] - [100%/80%] - [OK] - [PAM Measure] - [Renewal]
to display the following screen. The measurement results can be fed back to the machine
data.
9.1.8.1 Changeover of Nozzle Display
Press this button to toggle through the nozzles (1 to 6). The necessary data for each
nozzle is also displayed as each change of nozzle is made.
9.1.8.2 Update Proper
The measurement results can be fed back to the machine data. Depending on the level of
compensation, the measurement results can be used in full (1/1) or as a half (1/2).
9.1.8.3 1/1
Press this button to feed the measurement results back to the machine data as they are.
9.1.8.4 1/2
Press this button to feed 0.5 of the measurement results back to the machine data.
CP7T39008
Chapter 9 9.1 PAM
Edition 2.0 9-8 CP-7-series Level 3 Tutorial
9.1.8.5 Machine Data Format
The format at a cam speed of 80% is detailed below.
Head A X MC0A1POX -10.000
↑↑ ↑ ↑
Head Axes CCIMF name Machine data
CCIMF names for other nozzles display as shown below.
MCO [A – P] [1 – 6] PO [X,Y]
A – P: Head A – P
1 – 6: Nozzle 1 – 6
X, Y: Axes
The format at a cam speed of 100% is detailed below.
Head A X MC0A1POX100 -10.000
↑↑ ↑ ↑
Head Axes CCIMF name Machine data
CCIMF names for other nozzles display as shown below.
MCO [A – P] [1 – 6] PO [X,Y] 100
A – P: Head A – P
1 – 6: Nozzle 1 – 6
X, Y: Axes
Chapter 9 9.1 PAM
Edition 2.0 9-9 CP-7-series Level 3 Tutorial
9.1.9 Editing the Offset Tolerances
Press [Maintenance] - [PAM Measure] - [100%/80%] - [OK] - [PAM Measure] - [Setting
offset tolerance] to display the following screen. The offset tolerances can be set at this
screen.
9.1.9.1 Set
Press [Set] to the left of the item to be edited, and input the setting using the numerical
keypad.
9.1.9.2 Offset Tolerances
PAM parts which are found to be outside these tolerances when they are inspected
during the PAM placement measurement are treated as error data.
Parts which fall within the range indicated by the following function are regarded as
valid. Parts outside this range are treated as errors.
- Offset tolerance < Inspection result < + Offset tolerance
CP7T39009
Chapter 9 9.1 PAM
Edition 2.0 9-10 CP-7-series Level 3 Tutorial