CP7 Series Level3 Tutorial Manual.pdf - 第4页

About This Manual This manual contains important machine maintenance information for the user. The manual content is intended for specialized technicians who are familiar with the systems used in this machine. Please rea…

100%1 / 158
Notice
1. All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This
manual may not, in whole or in part, be reproduced by any means (electronic, mechanical or
otherwise), or reused in any way, without the prior written permission of Fuji Machine
Manufacturing Co., Ltd.
2. Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for any situations that may arise as
a result of the use of this manual.
3. Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual
without notice.
4. Every effort has been made to ensure that this manual is correct in every detail. However, please
contact Fuji in the unlikely event that errors or omissions are detected.
Copyright 2001 by Fuji Machine Manufacturing Co., Ltd. All Rights Reserved.
is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the
following countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia,
Ireland, Italy, Japan, Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K., and the
U.S.A.
Fuji Machine Manufacturing Co., Ltd. serves its customers from the following locations:
Fuji Machine Manufacturing Co., Ltd.
19 Chausuyama Yamamachi, Chiryu, Aichi, 472-8686 Japan
Tel: (0566) 81 - 2111 Fax: (0566) 83 - 1140
Fuji America Corporation
171 Corporate Woods Parkway, Vernon Hills, IL. 60061 USA
Tel: (847) 913-0162 Fax: (847) 913-0186
Fuji Machine Mfg (Europe) GmbH
Peter-Sander-Str. 43, D-55252 Mainz-Kastel Germany
Tel: 06134-202120 Fax: 06134-202200
Fuji do Brasil Maquinas Industriais Ltda.
Rua Joao Cachoeira,
128 Itaim Bibi, Sao Paulo, SP 04535-000 Brazil
Tel: 11-3064-7650 Fax: 11-852-6833
Fuji Machine Philippines, Inc.
Warehouse 888 Don Mariano Lim
Industrial Complex (La Fuerza Compound) Alabang, Zapote Rd.,
Almanza Uno Las Pinas City, Philippines
Tel: (02) 809-4565 Fax: (02) 807-2767
Fuji Machine Mfg (Singapore) Pte Ltd.
Blk 2/51, Ubi Avenue 1, #01-24, Paya Ubi Industrial Park,
Singapore 408933
Tel: 65-7464966 Fax: 65-8412326
Fuji Malaysia Office
C/O Mecomb Malaysia Sdn Bhd
2487, Jalan Sultan Azlan Shah, 11700 Penang, Malaysia
Tel: (04) 656-4002 Fax: (04) 656-2941
Fuji Taiwan Office
C/O Ascentex Industry Corp.
3 Fl, No. 396, Sec. 1, Nei Hu Rd., Taipei, Taiwan R.O.C.
Tel: (02) 8797-8716 Fax: (02) 8797-8717
R
About This Manual
This manual contains important machine maintenance information for the user.
The manual content is intended for specialized technicians who are familiar with the
systems used in this machine.
Please read this manual carefully in order to ensure safe and efficient machine
maintenance.
Some of the machine names used in this manual are not the formal machine names.
(Formal machine name) (Notation used in this manual)
FUJI CP-732E CP-732E
FUJI CP-742E CP-742E
FUJI CP-742ME CP-742ME
Manual Structure
This manual consists of the following ten chapters.
Safety Guidelines
Chapter 1 X, Y, and Z-Axes
Chapter 2 X, Y, and Z-Axes Calibration Data Measurements
Chapter 3 D-Axes
Chapter 4 PQ, FQ, and RQ-Axes
Chapter 5 NC-Axis
Chapter 6 NZ-Axis
Chapter 7 Mark Camera
Chapter 8 Parts Cameras
Chapter 9 Placement Accuracy Measurement (PAM)
About This Manual
Edition 2.0 i CP-7-series Level 3 Tutorial
Page Layout
Each page indicates the chapter number, section number and title, body, manual name,
page number, and the edition number.
Chapter number
The chapter number to which each section belongs is shown on the header on each page.
Section number and title
The number and title of each section is shown in the header on each page. Each chapter
may contain one or more sections.
Section title
Each section may be divided into several sub-sections. The sub-section number is
composed of the number of the section to which the sub-section belongs, followed by a
sequential number for each sub-section.
1.2 X-Axis Adjustments
Procedure:
CP732E Only
1. Temporarily remove the -OT sensor dog prior to performing the X-axis
adjustments.
2. Either manually, or by means of the inching keys, move the motor until
the pulse count reads -75000 pulses.
3. Place the 155 mm spacer between the X-axis plus mechanical stopper and
the X-axis base (refer to the diagram below). At this point, tighten the
coupling bolts with 7 N.m torque.
4. Remove the spacer and push the X-axis against the plus side mechanical
stopper. Record the motor pulse count at this position.
XY-table
155 mm spacer
X-motor
CP7T31005
X-axis coupling
Chapter 1 1.2 X-Axis Adjustments
Edition 2.0 1-5 CP-7-series Level 3 Tutorial
Chapter number
Section number and title
Section title
Body
Edition number
Page number
Manual name
CP732TC1
About This Manual
Edition 2.0 ii CP-7-series Level 3 Tutorial