CP7 Series Level3 Tutorial Manual.pdf - 第42页
Chapter 1 1.5 Replacing the Z-Motor Edition 2.0 1-17 CP-7-series Level 3 T utorial 1.5 Replacing the Z-Motor The Z-motor (refer to figure below) is responsible for moving the production table down inside the machine in o…
Chapter 1 1.4 Y-Axis Adjustments
Edition 2.0 1-16 CP-7-series Level 3 Tutorial
Notes:
Chapter 1 1.5 Replacing the Z-Motor
Edition 2.0 1-17 CP-7-series Level 3 Tutorial
1.5 Replacing the Z-Motor
The Z-motor (refer to figure below) is responsible for moving the production table
down inside the machine in order to load and unload boards, and also to raise and
lower PCBs to the appropriate placing height based on the part height set in part
data.
A poorly adjusted or problematic Z-axis may prevent the PCB from being clamped
and unclamped properly when loading and unloading. It may also result in
damage to shafts or nozzles, or tombstoning of parts.
• Damage or slippage of the coupling that connects the Z-motor and the Z-axis ball
screw.
• After replacing the Z-motor
• After replacing the OT sensors, etc.
CP7T31015
Z-axis motor
Chapter 1 1.5 Replacing the Z-Motor
Edition 2.0 1-18 CP-7-series Level 3 Tutorial
Required Tools: 1 Set of Allen Wrenches
1 Torque Wrench
1 0.2 mm Filler Gauge
1 Dial Gauge
1 Tension Meter
Required Jig: 1 Lock nut wrench
Resolution: 0.002 mm/pulse World (Zero)
Affected Proper: Max Limit Z → MC0MAXZ
Min Limit Z → MC0MINZ
Caution
Ensure that a back-up of Proper data is taken prior to replacing the
motor.
CN001
DCPJ0700
CP7T31016
AWPJ8090
CP-732E
CP742E(ME)