00190725-01.pdf - 第21页

1.4. 5 Sub menu s M S-102 , 128 an d 132 The display of the s ubmenus - s im ilarly t o the main m enu - is dependent on the opt ions activated. Details relating to these submenus → see chap. 5 " Description of the …

WARNING

∆

Any concurrent setting of competing outputs may result in damage to the machine!

N o (!) verification by the software is carried out !

1 Overview of the Program User’s Manual AutoCal Program

1.4 Program Run and Operation Software Version 114.xxx

1 - 14

1.4.5 Submenus MS-102, 128 and 132

The display of the submenus - similarly to the main menu - is dependent on the options activated.

Details relating to these submenus → see chap. 5 " Description of the Menu Options for MS-102 / 132".

These submenus are designed for

checking and correcting MA-data:

• The

EDIT MENU

allows you to enter the data that cannot be captured automatically (e.g. zero point cor-

rection values of the axes) directly into the MA-data and to initialize the axes directly from the EDIT MENU.

• Upon starting the AutoCal program: If you have to respond to the first query "Z AXIS IN UPPER POSI-

TION?" with NO, the main menu is displayed from which the EDIT MENU can be selected enabling

you to check / edit the zero point correction and to initialize the axes.

• Under "Options" you can review the activation of a given option, yet no changes can be made.

• Under "ADAPTER DATA" you can (with the

Nozzle changer

activated)

obtain a display of the X, Y and

Z-pick-up positions of the nozzles, the adapter lengths and the Z-position following the pick-up of the

adapters.

• Within the measuring sequence of the routine check, call up the EDIT MENU to check, for instance,

the "min. / max. X and Y-travel paths" and to correct them, if required (see AutoCal measuring sequen-

ce description).

• The

AXES INITIALIZING MENU

enables you to initialize individual or all axes.

Fig. 1.9 Submenus MS-102/-128/-132

User’s Manual AutoCal Program 1 Overview of the Program

Software Version 114.xxx 1.4 Program Run and Operation

1 - 15

These submenus are designed to determine MA-Data and the gantry offset:

• The

TRACK MEASURING MENU

is displayed for the feeder parts 1 to 10.

• The

MAPPING MENU

is offered on MS-machines for "steel mapping".

• The

COMPONENT CAMERA MENU

allows you to call up a number of measuring routines either blockwi-

se or individually. In this connection, pay attention to the information contained in section 1.4.2.

Fig. 1.10 Submenus MS-102/-128/-132

1 Overview of the Program User’s Manual AutoCal Program

1.4 Program Run and Operation Software Version 114.xxx

1 - 16