EUKYX-199-2100_G5S2_Instruction_Vol2_E.pdf - 第120页
EUKYX 2-7 199-2100 2.4 Composition of Control Data 2.4 Composition of Control Dat a The set parameters are used to set automat ic operati on and PCB transfer co ntrol . Refer to 3 .4 Control in th is chapter for t he det…
EUKYX
2-7199-2100
2.4 Composition of Control Data
2.4 Composition of Control Data
The set parameters are used to set automatic operation and PCB transfer control.
Refer to 3.4 Control in this chapter for the details of each item.
D01 Control Data
Items Ref. No.
Placement Mode (D01_01)
PCB Finishing Position (D01_02)
Pre-PL cmpnt thkns CB Top
PCB Bottom
(D01_03)
PEC expansion correction (D01_04)
D02 PCB Locate Data
Items Ref. No.
PCB detection off DLY (D02_01)
PCB Locate SET (D02_02)
PCB Locate Sequence (D02_03)
UP MOVE (D02_04)
1st Speed DCLR SET
2nd Speed DCLR SET
Z Clamp Opr. waiting time
Opr. ST DLY timer
DN MOVE (D02_05)
1st Speed DCLR SET
2nd Speed DCLR SET
Backup axis DN start DLY
SW POSN of 1st / 2nd (D02_06)
Replace vacuum sensor (D02_07)
PCB position of contact (D02_08)
UP MOVE (D02_09)
1st speed DCLR SET
2nd speed DCLR SET
Vac. Ctrl. delayed starts
Vac. Wtg. Timer
Z clamp waiting time
DN MOVE (D02_10)
1st speed DCLR SET
2nd speed DCLR SET
Vac. Ctrl. delayed starts
Vac. Wtg. Timer
Damaged Vac. Wtg. time
Backup axis DN start DLY
Reference
EUKYX
2-8199-2100
2.4 Composition of Control Data
D03 Transfer Speed Data
Items Ref. No.
Transportation speed SET (D03_01)
Transfer speed Carrier
Stage inside
Output
(D03_02)
Input CNVR Y POSN ARR spd set-up (D03_03)
Output CNVR Y POSN ARR spd set-up (D03_04)
Component Deviation
Control
Carrier
Stage inside
Output
(D03_05)
Control the stop position Carrier
Positioning 1
Positioning 2
Output
(D03_06)