EUKYX-199-2100_G5S2_Instruction_Vol2_E.pdf - 第244页
EUKYX 6-7 199-2100 4. "CNVR Set-up" Window • For Suppor t Pin Manual Chan ge • When the [ST ART] button is pressed within 10 seconds after this button is pressed, the head retracts and the conveyor width become…
EUKYX
6-6199-2100
4. "CNVR Set-up" Window
4. "CNVR Set-up" Window
The "CNVR Set-up" window appears.
[1]
[2]
[5]
[4]
[3]
[6]
Graphic
Development
MTN:NotRdy RCG:NotRdy
F2F7
[1] "Set-up Mode" Group Box
Each function in this group box can be used for the manual replacement work of the support pins.
(a) The window above displays the automatic replacement of support pins. When replacing
support pins manually, the display of "Set-up Mode" is different from above.
(b) The manual replacement of support pins is available with setting below.
[Product] - [Prod.Dt.] - [PP.Data] - [Operation] - [Set-up] - [Support pin] - [Not Exchange].
(c) Even if the support pins are set to "Exchange", they are not replaced automatically when
switching the pattern program by selecting [Set-up] - [Setup all Line Select] - [PCB Sup.
Pins Chg.Noz.] - [Set] - [Disable]. However, support pins can be replaced automatically
on the”CNVR Set-up” window.
(d) The support pins are replaced automatically when switching the pattern program with
the settings (1) + (2).
(1) [Product] - [Prod.Dt.] - [PP.Data] - [Operation] - [Set-up] - [Support pin] - [Exchange]
(2) [Set-up] - [Setup all Line Select] - [PCB Sup. Pins Chg.Noz.] - [Set] - [Enable]
Note
EUKYX
6-7199-2100
4. "CNVR Set-up" Window
• For Support Pin Manual Change
• When the [START] button is pressed within 10 seconds
after this button is pressed, the head retracts and
the conveyor width becomes the maximum one.
• When the [START] button is pressed within 10 seconds
after this button is pressed, the conveyor width is changed
according to the PCB size Y that is set to pattern program.
• When the [START] button is pressed within 10 seconds
after pressing the [Locate] button in the "PCB Locate"
group box, the support base starts moving up.
• Press the [COVER] button at the bottom of window to unlock
the cover. Open the cover to arrange support pins and then
close the cover.
• Press the [START] button in 10 seconds after pressing the
[Release] button in the "PCB Locate" group box.
The backup base starts moving down.
PCB Support Pins Rem. Work
• Press the [COVER] button at the bottom of window to unlock
the cover. Open the cover to collect support pins and then
close the cover.
PCB Support Pins Attachment Work
F2F8
• For Support Pin Automatic Change
• When the [START] button is pressed within 10 seconds
after this button is pressed, the head retracts and
the conveyor width becomes the maximum one.
• When the [START] button is pressed within 10 seconds
after this button is pressed, the support pin automatic
setup is performed according to the pattern program.
• When the [START] button is pressed within 10 seconds
after this button is pressed, the conveyor width is moved
to the production position.
F2F9
[2] "Noz Chg." Group Box
[Reset] Button
When this button is pressed and within 10 seconds, the [START] button on the operation
panel is pressed, the support pins are housed in the nozzle area.
EUKYX
6-8199-2100
4. "CNVR Set-up" Window
[3] "PCB Support Pins" Group Box
[Reset PCB Sup.Pins] Button
When the [START] button is pressed within 10 seconds after this button is pressed, the
support pins are housed in the stock area.
[Stkr.Area Edit] Button
In the case that the PCB support pins are to be moved manually or an error occurs, the stock
area parameters are edited.
When the [Stkr.Area Edit] button is pressed, the "Stkr.Area Edit" window appears.
Refer to “4.2 “Stkr.Area Edit” Window” for the details of the "Stkr.Area Edit" window.
[4] PCB Locate Section Select Buttons
When pressed, the PCB positioning section on the side where the setup operation is to be
performed, is selected.
[Side L] Button : PCB Locate L Section
[Side R] Button : PCB Locate R Section
[5] "PCB Locate" Group Box
[Locate] Button :
When pressed, this button moves up the Z clamp and the backup base
and locates the PCB.
[Release] Button :
When pressed, this button moves down the Z clamp and the backup
base and releases the PCB locating.
[6] "Conveyor Width" Group Box
PCB Size Y, Y Standard Pos.
The "PCB size Y" and "Y Standard Pos." set on the pattern program data for the product
model, are shown in these data boxes.
[Clearance] Button
When this button is pressed, the "Clearance" window opens. Enter the value as a leeway
between the conveyor width and the PCB. The entered value appears in the text box beside
this button. The actual conveyor width becomes "PCB Size Y + Clearance (Recommended
Value: 0.5 mm)".
Reference