EUKYX-199-2100_G5S2_Instruction_Vol2_E.pdf - 第284页

EUKYX 6-47 199-2100 7.3 "COMP RCG" T est Window [ 6] [Edit ] But t on When this button is pressed, the test ID selected in [1 ] is edited. Refer to “C hapt er 3 Component Library ” , for the editi ng procedure …

EUKYX

6-46199-2100

7.3 "COMP RCG" Test Window

[3] Recognition Display Section

The recognition results are displayed in this pane.

[4] Operation Buttons (First Page)

Pick-up mode

Feeder :

This mode is selected when the component is picked up from each feeder automatically and

the test is performed.

Mnl. :

This mode is selected when the component is attached to the nozzle manually and the test is

performed. When the [Fr.] button is pressed, the head on the XY beam specified using the

"Head Sel" button, is moved to the center position (home position) and the nozzle of which

No. has been specified in "Noz select" button, is moved (turned) to this side.

Feeder No.

Using this button, the feeder to be used to pick-up the test component is selected. When this

button is pressed, the window to enter feeder No. appears.

Fdr P-u Tch

Press this button and then press the [START] button within 10 seconds. The pickup position

teaching is performed for specified feeder.

Refer to “7.1.1 Fdr Pick- up Tch”, for pickup position teaching.

Head Sel

Pressing this button selects the head that component recognition test is performed.

Select camera

Pressing this button selects the camera that component recognition test is performed.

Noz select

Using this button, the nozzle to be used for the recognition test is selected. When this button

is pressed, the "Nozzle No." selection window appears.

[Fr.] Button

When this button is pressed, the next page appears.

[5] Test Result

When this button is pressed, the component recognition test results are displayed.

Reference

EUKYX

6-47199-2100

7.3 "COMP RCG" Test Window

[6] [Edit] Button

When this button is pressed, the test ID selected in [1] is edited.

Refer to “Chapter 3 Component Library”, for the editing procedure.

[Img Save] Button

When this button is pressed, the "Img Save" window appears.

This window is used to save the test results.

[Noz Chg] Button

When this button is pressed, the "NOZ.CHG." window appears.

Refer to “5. “NOZ.CHG.” Window” for the details of the "NOZ.CHG." window.

[7] [Bk.] Button

When this button is pressed, the "COMP RCG" test window is returned.

[8] Operation Buttons (Second Page)

[10]

F2F54

■

Tape Feed

[Enable] Button : When this button is pressed, the tape is fed when the test component is

picked up from the feeder.

[Disable] Button

: When this button is pressed, the tape is not fed when the test component

is picked up from the feeder.

■

Thkns t teach

[Enable] Button : When this button is pressed, the component thickness teaching is

performed.

[Disable] Button

: When this button is pressed, the component thickness teaching is not

performed.

Reference

EUKYX

6-48199-2100

7.3 "COMP RCG" Test Window

[Pick-up] Button

• "Feeder" is selected for "Pick-up mode"

When this button is pressed and within 10 seconds, the [START] button on the operation panel is

pressed, the head in the block selected using the “[4] Head Sel” button, is moved to the position of

the feeder of which No. has been selected using the [4] Feeder No.” button and the component is

picked up automatically.

• "Mnl." is selected for "Pick-up mode"

The component is picked up by pressing [Pick-up] button and set the component manually to the

nozzle center specified in [4] Noz Select of the head in the block specified in [4] Head Sel.

[Vac. On] Button

This button is displayed when “Mnl.“ is selected for “Pick-up mode“. When a component is picked

up, the button name is changed from [Vac. On] to [Vac. Off]. Pressing the [Vac. Off] button

releases the picked up component.

[Recog] Button

When this button is pressed within 10 seconds, the [START] button on the operation panel is

pressed, the head in the block selected using the "[4]

Head Sel" button, is moved to the component recognition camera position and the component

recognition is executed.

[Teach] Button

This button is selected when new component library registration is performed.

Refer to “7.3.6 Windows displayed with [Teach] button” for the details.

[Hysteresis] Button

The component deviation in the pick-up operation can be tested using this "Hysteresis test" button,

When this button is pressed, the "Hysteresis Test" window appears.

[Flux Apply] Button

This button is displayed when the optional flux apply unit is set. Pressing this button displays the

“Flux Apply“ window. The thickness of the applied flux can be measured.

[Cop. Test] Button

This button is displayed when the optional coplanarity check function is set. Pressing this button

displays the “Cop.Test“ window. The uniformity of the bottom most surface of component can be

measured.

[Dscd] Button

When this button is pressed, the component is disposed of according to the component library data.

When this button is pressed, all the axes of the selected XY beam are zeroed.

[Collect.] Button

This button is used when collecting component manually.

When this button is pressed and within 10 seconds, the [START] button on the operation panel is

pressed, the head is move to the lane No. specified using the “Coll. Pos” button.

[Vac. Off] Button

This button changes the ON/OFF of nozzle vacuum. The button name is changed to [Vac. ON] or

[Vac. OFF] depending on the vacuum status.

After moving the head to the specified position and put your hand under the component, press the

button to release the component and collect it with hand.

[Bk.] Button

When this button is pressed, the previous page appears.

[ZERO] Button

Coll.Pos

Using this button, the test component collection position is specified.

Reference