EUKYX-199-2100_G5S2_Instruction_Vol2_E.pdf - 第121页
EUKYX 2-8 199-2100 2.4 Composition of Control Data D03 T ransfer Sp eed D ata Items R ef. No . T r an sp or t ati on sp ee d SET ( D 0 3 _ 01) T ransfer speed Carr ier Stage inside Output (D03 _02 ) Inp ut CNVR Y POSN AR…
EUKYX
2-7199-2100
2.4 Composition of Control Data
2.4 Composition of Control Data
The set parameters are used to set automatic operation and PCB transfer control.
Refer to 3.4 Control in this chapter for the details of each item.
D01 Control Data
Items Ref. No.
Placement Mode (D01_01)
PCB Finishing Position (D01_02)
Pre-PL cmpnt thkns CB Top
PCB Bottom
(D01_03)
PEC expansion correction (D01_04)
D02 PCB Locate Data
Items Ref. No.
PCB detection off DLY (D02_01)
PCB Locate SET (D02_02)
PCB Locate Sequence (D02_03)
UP MOVE (D02_04)
1st Speed DCLR SET
2nd Speed DCLR SET
Z Clamp Opr. waiting time
Opr. ST DLY timer
DN MOVE (D02_05)
1st Speed DCLR SET
2nd Speed DCLR SET
Backup axis DN start DLY
SW POSN of 1st / 2nd (D02_06)
Replace vacuum sensor (D02_07)
PCB position of contact (D02_08)
UP MOVE (D02_09)
1st speed DCLR SET
2nd speed DCLR SET
Vac. Ctrl. delayed starts
Vac. Wtg. Timer
Z clamp waiting time
DN MOVE (D02_10)
1st speed DCLR SET
2nd speed DCLR SET
Vac. Ctrl. delayed starts
Vac. Wtg. Timer
Damaged Vac. Wtg. time
Backup axis DN start DLY
Reference
EUKYX
2-8199-2100
2.4 Composition of Control Data
D03 Transfer Speed Data
Items Ref. No.
Transportation speed SET (D03_01)
Transfer speed Carrier
Stage inside
Output
(D03_02)
Input CNVR Y POSN ARR spd set-up (D03_03)
Output CNVR Y POSN ARR spd set-up (D03_04)
Component Deviation
Control
Carrier
Stage inside
Output
(D03_05)
Control the stop position Carrier
Positioning 1
Positioning 2
Output
(D03_06)
EUKYX
2-9199-2100
2.5 Composition of Placement Nozzle Data
2.5 Composition of Placement Nozzle Data
The set parameters are used to place the nozzles onto the specified positions on the head (Place
Head/Noz No.).
Refer to “3.5 PL Head/Nozzle” in this chapter for the details of each item according to the
reference Nos. (Ref. Nos.).
E01 Nozzle Place Data
Items Ref. No.
Nozzle Place (E01)
Nozzle Stk 1 (E02)
Nozzle Stk 2 (E02)
2.6 Composition of Placement Feeder Location Data
The set parameters are used to determine which feeder slot Nos. (Fdr No.) various types of
components should be allocated to.
Component IDs (types of components to be allocated) must be specified for each individual feeder
bases.
Refer to 3.6 CMPNT PL in this chapter for the details of each item according to the reference
Nos. (Ref. Nos.).
F01 CMPNT PL Data
Items Ref. No.
Fdr No. (F01_01)
Component ID (F01_02)
C (Control Command) (F01_03)
Comment (F01_04)
Feeder Fixed (F01_05)
Feeder Alternate (F01_06)
Fdr No. (F01_07)
Component Library Comment (F01_08)
Dir [deg], Carrier Data Type, Width [mm] (F01_09)
Fd. Pitch [mm] (F01_10)
Used Parts (F01_11)
Nozzle Type (F01_12)
Reference
Reference