EUKYX-199-2100_G5S2_Instruction_Vol2_E.pdf - 第92页

EUKYX 1-42 199-2100 4.2.7 T ape Pock et Recog When the [ T ape Pocket R ecog] but ton is pressed on the " Operation Mode" tab she et, the fol low in g window ap pear s. Thi s function recogn iz es the po ck et …

EUKYX

1-41199-2100

[3] Fdr Fiducial Recog

Enable:

It is selected when the Feeder Fiducial Recognition is used.

Disable:

It is selected when the Feeder Fiducial Recognition is not used.

[4] Fdr In/Out

"Enable" or "Disable" can be selected to determine whether or not the feeder offset (B) data should

be cleared automatically when the feeder is installed or uninstalled.

►

Fdr Offset (B) Auto Clear

Disable

Select this button not to clear the feeder offset (B) data automatically when the feeder is installed or

uninstalled.

Enable

Select this button to clear the feeder offset (B) data automatically when the feeder is installed or

uninstalled.

[5] Start with installed Fdr only

Disable

When pressed, automatic operation with installed feeder only is available.

Enable

When pressed, automatic operation with installed feeder only is disabled.

[6] In-use Fdr in/out

Disable

This button is selected when the "in-use feeder in/out" function is not used.

Enable

This button is selected when "in-use feeder in/out" function is used.

4.2 "Opr.Mode" Tab Sheet

EUKYX

1-42199-2100

4.2.7 Tape Pocket Recog

When the [Tape Pocket Recog] button is pressed on the "Operation Mode" tab sheet, the following

window appears.

This function recognizes the pocket edge section, finds the pocket center and feedbacks the result

to the feeder offset (B) value.

[15]

[6]

[2]

[3]

[4]

[5]

[8]

[9]

[10]

[11]

[7]

[1]

[12]

[13]

[14]

F2A33A

(a) This function can be used for the components (size: 2012 or less) packaged in a paper

tape.

(b) In the case that the actual component size is out of the range of ±25% of the component

size set in the component library, the "Machine Information" window appears.

Note

4.2 "Opr.Mode" Tab Sheet

EUKYX

1-43199-2100

[1] Func Set

"Enable" or "Disable" can be selected to determine whether or not the automatic teaching

function should be used for the feeder pocket recognition.

[Disable] Button

Select this button not to use the automatic teaching function for the feeder pocket

recognition.

[Enable] Button

Select this button to use the automatic teaching function for the feeder pocket recognition.

When the [Enable] button is selected for "Func Set" (automatic teaching of feeder pocket

recognition) in the "Tape Pocket Recog" group box, the following buttons become available.

[2] Interval

When this button is pressed, the "Interval" window opens, enabling you to specify the number of

automatic teaching operations to be performed periodically according to the number of tape feeding

times for the feeder pocket recognition.

[3] On Handling Err

One of the following buttons can be selected to determine whether or not an automatic

teaching operation should be performed on the feeder pocket recognition after a pickup

error has occurred.

Disable

Select this button not to perform an automatic teaching operation on the feeder pocket

recognition after a pickup error has occurred.

Enable

Select this button to perform an automatic teaching operation on the feeder pocket

recognition after a pickup error has occurred.

This function is not available unless the "On Handling Err (Recog Time)" is set to "1" or more.

[4] On Handling Err (Recog Time)

Set the feeder pocket recognition times when the "On Handling Err" has been set to "Enable".

[5] EP Data 1 invalid set

Enable

When the number of handling errors reaches the value set in [4], the production is stopped.

Disable

The EP data 1 count becomes invalid and the pick-up operation is continued without

stopping the production.

[6] Recog when Exceeding Pickup Diff

Enable

When this button is selected, the component recognition determination is performed. When

the component pickup difference is larger than the value set in the “[7] Comp size setting”,

the pocket recognition is performed.

Disable

When this button is selected, the component recognition determination is not performed.

Note

4.2 "Opr.Mode" Tab Sheet