EUKYX-199-2100_G5S2_Instruction_Vol2_E.pdf - 第88页
EUKYX 1-38 199-2100 4.2. 5 Speed The fol lowi ng wi ndow appear s by press in g the [ Spe ed] but ton on the “Opr . M ode“ tab she et. Whether or not the sp eed upp er l im it is set, is sel ecte d for the operation spee…
EUKYX
1-37199-2100
►
High-speed flexible Head
Detect the component drop by monitoring the vacuum flow rate from the head when mounting.
Select “Disable“, “Enable (Auto)“, “Enable (Notice)“, or “Enable (Stop)“.
Disable
When this button is selected, the Comp Drop detection function is not used.
Enable (Auto)
When this button is selected, the Comp Drop detection function is used.
No information is reported when the vacuum flow rate from the head is abnormal value when
mounting a component normally.
Enable (Notice)
When this button is selected, the Comp Drop detection function is used.
The information is reported on the machine information when the vacuum flow rate from the head
is abnormal value when mounting a component normally.
Enable (Stop)
When this button is selected, the Comp Drop detection function is used.
The information is reported on the machine information and the operation is stopped when the
vacuum flow rate from the head is abnormal value when mounting a component normally.
(a) The component drop is not detected for the component that the vacuum flow rate from
the head is abnormal value when mounting the component normally.
(b) The component drop is not detected for the nozzle that the vacuum flow rate from the
head is not abnormal value when a component is dropping.
[4] Surplus Comp detection function
When picking up 2 or more components set as “Square“ in the Component Library, this
function detects them as the recognition error.
Disable
When selected, Surplus Comp detection function is not used.
Enable
When selected, Surplus Comp detection function is used.
[5] [ ]/[ ] Page change buttons
Changes the page of “Comp Handling“ window.
[6] Remaining comp on Nzl check after plcmnt
Setting the button which is displayed under each nozzle in the Head 1 or 2, to “OFF”, cancels the
nozzle check before the component pick-up operation for each nozzle.
ON : The nozzle check before pick-up operation is to be performed.
OFF : The nozzle check before pick-up operation is not to be performed.
Setting it to “OFF” for the nozzles with larger diameter, prevents a malfunction such as a
machine stop in such case that solder debris, etc., attached to the nozzle, is judged as a
component taken back by the nozzle.
Note
Note
4.2 "Opr.Mode" Tab Sheet
EUKYX
1-38199-2100
4.2.5 Speed
The following window appears by pressing the [Speed] button on the “Opr. Mode“ tab sheet.
Whether or not the speed upper limit is set, is selected for the operation speed in each unit, which
has been designated in the component library data (speed reduction rate to the maximum speed).
[1]
[3]
[4]
[2]
[9]
[10]
[5]
[6]
[7]
[8]
[11]
F2A31A
[1] Mode
The following buttons can be selected to determine whether or not the running speed reduction
mode should be used.
When "Not Save" is selected, the other items cannot be set.
No Designate
When selected, this button disables you to designate the reduction of the running speed.
Designate
When selected, this button enables you to designate the reduction of the running speed.
In this case, as the following buttons become available, set the rate of each speed reduction.
[2] All Setting
When this button is pressed, the [All Setting] window opens. In this window, set the speed
reduction rate in the data entry field. The set speed reduction rate is reflected on all other settings.
[3] X/Y Beam
When this button is pressed, the “X/Y Beam” entry window is displayed. In this window, set the
speed reduction rate for the X/Y beam in the data entry field.
[4] Nozzle Pickup Descent
When this button is pressed, the “Nozzle Pick-Up Descent” edit window opens.
Set the rate of speed reduction in the data entry field for the descending movement of the nozzle
(nozzle movement to pick up a component from the feeder).
Note
4.2 "Opr.Mode" Tab Sheet
EUKYX
1-39199-2100
[5] Nozzle Pickup Ascent
When this button is pressed, the "Nozzle Pick-Up Ascent" edit window opens.
Set the rate of speed reduction in the data entry field for the ascending movement of the nozzle
(nozzle movement after the nozzle has picked up a component from the feeder).
[6] Nozzle Plcmnt Descent
When this button is pressed, the "Nozzle Plcmnt Descent" edit window opens.
Set the rate of speed reduction in the data entry field for the descending movement of the nozzle
(nozzle movement to place a component on the PCB).
[7] Nozzle Plcmnt Ascent
When this button is pressed, the "Nozzle Plcmnt Ascent" edit window opens.
Set the rate of speed reduction in the data entry field for the ascending movement of the nozzle
(nozzle movement after the nozzle has placed a component on the PCB).
[8] Nozzle Select
When this button is pressed, the "Nozzle Select" edit window opens.
Enter the rate of speed reduction in the data entry field for a series of operations performed when
the nozzle is changed.
[9] Head Up/Down
When this button is pressed, the "Head Up/Down" edit window opens.
Enter the rate of speed reduction in the data entry field for the head upward and downward
movement.
[10] Head Rotation
When this button is pressed, the “Head Rotation” edit window opens.
Enter the rate of speed reduction in the data entry field for the head rotation.
(a) If a higher speed than that specified in this window is set in the component library data,
it is regulated to the specified upper limit.
(b) If a lower speed than that specified in this window is set for some components in the
component library data, it becomes valid.
[11] Retention time bfr Pl descent
The stop time before the moving down for the placement, is set in this data box.
Rang : 0 to 255 ms
Value : 0 ms
Note
4.2 "Opr.Mode" Tab Sheet