EUKYX-199-2100_G5S2_Instruction_Vol2_E.pdf - 第256页
EUKYX 6-19 199-2100 5. "NOZ.CHG." Window [ 8] [Place. Noz Edit ] But t on When the [Place.Noz Edit] button is pressed, the "Ed it Pl acement No zzle D ata" window appears. F2F24 [ 9 ] [Nozzle Disce Rs…
EUKYX
6-18199-2100
5. "NOZ.CHG." Window
[6] [Zero] Button
When pressed, all devices are zeroed.
[7] [PLACE. HEAD/NOZ.] Button
Using this button, the head/nozzle placement data set in the pattern program can be read
and reflected on the setup.
[Noz Stkr Place] Tab
When pressing the stocker button to rewrite the nozzle stocker arrangement data and then
pressing the [SET] button, the data is rewritten.
When the [Noz Stkr Place] tab is pressed, the following tab sheet appears.
F2F22
[Head and Noz Place] Tab
When the [Head and Noz Place] tab is pressed, the tab sheet is changed to the "Head and
Noz Place" setup tab sheet. When pressing the stocker button to rewrite the head nozzle
arrangement data and then pressing the [SET] button, the data is rewritten.
F2F23
(a) Only the nozzles corresponding to each nozzle stocker (housing) can be allocated. That
is, only the high-speed nozzles can be allocated to the high-speed nozzle stockers
(housings) and only the middle-size odd shaped nozzle to the middle-size odd shaped
nozzle stockers (housings).
(b) In the case that there is any nozzle stocker where the nozzle allocation setting is
available, on the opposite side, the nozzles can be allocated on the opposite side.
Note
EUKYX
6-19199-2100
5. "NOZ.CHG." Window
[8] [Place. Noz Edit] Button
When the [Place.Noz Edit] button is pressed, the "Edit Placement Nozzle Data" window appears.
F2F24
[9] [Nozzle Disce Rslt] Button
When the [Noz.Disce Rslt] button is pressed, the "Nozzle Discernment Rslt" window appears.
F2F25
EUKYX
6-20199-2100
5. "NOZ.CHG." Window
[10] [Noz Pos Teaching Rslt] Button
When pressed, the teaching results for each nozzle position are displayed.
F2F26
[11] [DEV.CONF.SCRN] Button
When pressed, the current device configuration is displayed.
F2F27