EUKYX-199-2100_G5S2_Instruction_Vol2_E.pdf - 第326页

EUKYX 6-89 199-2100 8. "PCB.CNT ." Window • PCB Count er Sto p Procedur e ( 1 ) Display th e "PCB. CNT . " window . (2 ) Set t he "PCB Count er Stop M od e " to "Designat e" . (3 )…

EUKYX

6-88199-2100

8. "PCB.CNT." Window

This window enables the operator to set the number of PCBs to be produced.

[2]

[1]

Graphic

Development

F2F122

[1] PCB Counter Stop Mode

PCB Counter Stop Mode

[Designate] Button:

When this button is selected and the produced PCBs reach the value set in "Count" text box,

the PCB intake is stopped and after all the PCBs in the machine are discharged, the machine

is automatically stopped.

[No Designate] Button

When this button is selected, the PCB counter stop mode is not used.

Count

The number of produced PCBs for each lane for stopping the machine using the PCB Counter

Stop Mode, is set in this group box.

The set count is displayed in the "Count" data box in the "AUTO. OPN" window.

[2] [Init Value] Button

When this button is pressed, the set value for the "PCB Counter Stop Mode" is returned to the initial

value.

Note

EUKYX

6-89199-2100

8. "PCB.CNT." Window

• PCB Counter Stop Procedure

(1) Display the "PCB.CNT." window.

(2) Set the "PCB Counter Stop Mode" to "Designate".

(3) Press the [Count] button to display the "Count" window and read the "Count" barcode in

the instruction sheet using the barcode reader attached to the machine. (The value read

with the barcode reader, will be displayed on the "Count" window).

F2F123

(4) Confirm the read value and when it is OK, press the [Set] button.

(5) Confirm that the read value has been entered in the "Count" data box.

When the value in the "Count" data box is re-set, press the [Count] button and change the set

value.

Procedure

Note

Surface Mounter

EUKYX-199-2100

Instruction Manual : Volume 2 September 2019